NanoVACQ HT
4Pages

DATA SHEET TMI-Orion NanoVACQ Humidity and Temperature NanoVACQ Humidity and Temperature is a data logger equipped with one relative humidity sensor and up to two temperature sensors on the same logger. The various NanoVACQ Humidity and Temperature models are described below and can vary by number and type of probes, operating range and battery pack capacity. Each logger can be calibrated and adjusted at the temperature points corresponding to the user’s needs. *The specified uncertainties correspond to two standard deviations. The uncertainties are calculated taking into account the various significant error sources, including the calibration probes, the equipment, the environmental conditions, the 'influence of the logger, repeatability, etc... TMI-Orion NanoVACQ Humidity and Temperature

functions • Start set up: immediate or delayed • Time stamped measurement data • Memory set up: stop at maximum capacity or loop writing • Battery level alert with Qlever software * Internal platinum temperature sensor for humidity sensor compensation **This data logger is not watertight TMI-Orion NanoVACQ Humidity and Temperature

technical specifications Material Examples of NanoVACQ Humidity and Temperature models. TMI-Orion NanoVACQ Humidity and Temperature

Autonomy The NanoVACQ Humidity and Temperature is powered by a battery pack; its autonomy depends on environment and operational conditions of the application (extreme temperatures, data acquisition rate). As a result of the variety of environments and operational conditions, TMI-Orion does not guaranty the battery lifetime and recommends that the user determine the battery lifetime according to his own process conditions and experience. Software and related products NanoVACQ Humidity and Temperature is used with Qlever software. Vista/7/8/10. Data transmission and visualization are done...