Temperature sensor Pt 100 Type 22810

Product catalog summary

Overview: The document describes the Pt 100 Type 22810 temperature sensor, which is a flexible surface sensor made of platinum and supported by Kapton film. It is designed for quick setup on precise areas due to its flexibility, allowing for a perfect surface fit.

Technical Specifications:

Power Supply: Maximum of 1 mA.
Coefficient: 38.5 Ohms at 100°C, compliant with DIN43760.
Temperature Capacity: Ranges from -200°C to +288°C (-328°F to +550°F).
Electrical Insulation: Greater than 50 MOhm under 50 VDC at 25°C (77°F).
Precision: Standard precision is 0.5% (+/-0.5 Ohm) with an option for higher precision at 0.25% (+/-0.22 Ohm).
Standard Resistance: 100 Ohms at 0°C (32°F).
Response Time: 70 ms for a step of 63%.

Wiring: The sensor includes three Teflon cables, each 50 cm in length.

Manufacturer Information: Techniques Modernes d'Extensometrie, located at Parc d'activités de Signes, B.P. 734, 83030 Toulon Cedex 9, France. Contact via phone at 04.94.10.00.51 or fax at 04.94.10.00.52.

Additional Notes: Specifications are subject to change without notice.

Catalog excerpts

Temperature sensor Pt 100 Type 22810 Protected Pt100 sensor in a Kapton support Flexible surface sensor in platinum Power supply Coefficient Capacity Electrical insulation Precision Standard resistance Response time MOhm > 50 under 50 VDC at 25°C (77°F) TECHNIQUES MODERNES D'EXTENSOMETRIE Parc d'activites de Signes - B.P. 734 - 83030 TOULON Cedex 9 Tel. 04.94.10.00.51 - Fax 04.94.10.00.52 Specifications are subject to change without notice

Open the catalog to page 1

Outside dimensions TECHNIQUES MODERNES D'EXTENSOMETRIE Parc d'activités de Signes - B.P. 734 - 83030 TOULON Cedex 9 Tel. 04.94.10.00.51 - Fax 04.94.10.00.52 Specifications are subject to change without notice

Open the catalog to page 2

Temperature sensor Pt 100 Type 22810

Temperature sensor Pt 100 Type 22810

Catalog excerpts

All TME catalogs and technical brochures