Catalogs >
TME >
Temode L

Temode L
2Pages

Catalog excerpts

Signal conditionner Type TEMODE-L Very high precision Fully programmable, without pulldown menu, with only 4 front panel touch keys 4 or 6 wire installation 4 350 ohms sensors Output insulation Auto calibration or with a known signal Selectable functions (level, peak, valley, tare ) Linearisation The TEMODE conditioner is designed to be associated with a large range of gage sensors (pressure, load, torque, displacement) and potentiometers. It allows for a direct reading in the selected unit (bars, daN, m.daN, mm) after a simple adjustment of zero and full scale Technical specification Display digit 6 digits / ± 32 000 points Refresh rate 2 readings/seconde Sensor excitation voltage 10 V DC - 120 mA (4 sensors 350 W) Dimensions Casing 1/8 DIN 48 x 96 x 140 (H x L x P) Functions ·Peak (Band pass max. 10 Hz) ·Low (Band pass max. 10 Hz) ·Tare ·10 points linearisation Input range ± 50 mV Options TEMODE-P : For potentiometer sensors electrical installation Scew type connector Output options ·2 alarms with relays ·4 alarms with relays ·Isolated analog output 4/20 mA or 0/10 V ou +/5V (BP max 10 Hz) ·Serial isolated output RS 232 Operating temperature °C - 10 to + 50 (50 to 122°F) Excitation voltage V Standard 95 to 265 VAC Option : 11 to 30 VDC TECHNIQUES MODERNES D'EXTENSOMETRIE Parc d'activités de Signes - B.P. 734 - 83030 TOULON Cedex 9 Tel. 04.94.10.00.51 - Fax 04.94.10.00.52 Specifications are subject to change without notice Page 1

Open the catalog to page 1

Installation The functions PEAK, VALLEY, TARE are eith front panel touch keys or by outside commands TECHNIQUES MODERNES D'EXTENSOMETRIE Parc d'activités de Signes - B.P. 734 - 83030 TOULON Cedex 9 Tel. 04.94.10.00.51 - Fax 04.94.10.00.52 Specifications are subject to change without notice Page 2

Open the catalog to page 2

Temode L 2Pages

Catalog excerpts

All TME catalogs and technical brochures

Temode L
2Pages