Signal Conditioner Overview
This document describes a signal conditioner designed for rack mounting, specifically a 19-inch rack type. It is a multifunctional, multi-channel device available in four different widths and can accommodate up to 20 channels. The device features isolated inputs and outputs with options for ±10 V or 4-20 mA signals. It provides signal conditioning and amplification, with display options of 2000 or 20,000 points. Additional features include threshold settings, relay outputs, and the ability to sum two channels. Calibration notches are also included.

Physical Specifications
The signal conditioner is available in both tabletop and rack-mountable formats, typically using a height of 3U (155.55 mm). In some cases, it can be expanded to 6U or 9U. The maximum width is 84 F (470.30 mm), corresponding to the 19-inch rack size. Smaller widths include 63 F (363.70 mm), 42 F (257.00 mm), and 28 F (185.90 mm). The standard depth is 316 mm. The unit comes with necessary power connection accessories, machining, engraving, drawings, and instructions.

Technical Specifications
- Power Supply: 230 V
- Electrical Connection: Sensors and thresholds via Amphenol or Jaeger connectors
- Analog Output: BNC connectors

Card Options
- ME 5900R: Gauge sensors with a wide range of gain and zero
- ME 5900RP: Potentiometers
- ME 5900RS: Semiconductor sensors
- ME 5100R: Gauge sensors
- ME 5100RP: Potentiometers with current analog output and relay output options
- ME 5102R: Dual-channel gauge sensors
- ME 5102RP: Dual-channel potentiometers with summing option
- ME 5110R: Peak card
- ME 5111R: Analog blocking card
- ME 6000: Card with three thresholds (minimum, maximum, good)

Manufacturer Information
Techniques Modernes d'Extensometrie
Parc d'activités de Signes - B.P. 734 - 83030 TOULON Cedex 9
Tel. 04.94.10.00.51 - Fax 04.94.10.00.52

Note: The manufacturer reserves the right to modify specifications without prior notice.