Signal conditionner/amplifier Type ME 5200 CR Designed for gages sensors or potentiometer sensors Integrated shunt calibration 3 position gain switch Scale adjustable with potentiometer LCD voltage meter integrated - 3 ½ digits The MB 2001 conditioner is designed to be associated with a large range of gage sensors (pressure, load, torque, displacement) and potentiometers. Technical specification Excitation voltage V Sensor excitation voltage 220 - 50 Hz 4 to 12 V regulation 10 puissance-5 (factory setup 10V) Band pass Consumption 0-15 KHz (500 Hz factory setup) mA Calibration reference resistor 50 By conter voltage 1 mV/V (gages) - 10 mV/V (semi-conductors) et 100% (pot.) Input resistance Ohm Zero range > 10 power 12 ± 10% range minimum Output signal Vdc 0-10V (20 mA maximum) Operating temperature °C 0 to +50 (32 to 120°F) Storage temperature -10 to +70°C (14 to 160°F) TECHNIQUES MODERNES D'EXTENSOMETRIE Parc d'activités de Signes - B.P. 734 - 83030 TOULON Cedex 9 Tel. 04.94.10.00.51 - Fax 04.94.10.00.52 Specifications are subject to change without notice Page 1

Installation Rack system heigh 3U - width 10 F (1 F = 5.08 mm) Sensor connection on AMPHENOL 4 pin base connector Analog output on isolated BNC base Power 220 Volts on standard CEE22 plug with integrated fuse TECHNIQUES MODERNES D'EXTENSOMETRIE Parc d'activités de Signes - B.P. 734 - 83030 TOULON Cedex 9 Tel. 04.94.10.00.51 - Fax 04.94.10.00.52 Specifications are subject to change without notice Page 2