Catalogs >
TME >
DF

DF
2Pages

Catalog excerpts

Torque sensor Type 0125 DF .Range from 100 to 20,000 Nm (885 in.lbs to 177,000 in.lbs) .Precision: 0.2% capacity (option 0.1% capacity) .Brushless technology .Output signal +/- 5 VDC .Rotation speed 12,000 rpm .No internal bearings The torque sensor 0125 DF series is designed base on a no bearing technolgy. The torque signal is transmitted from the rotating shaft via frequency modulation without contact. Technical specification Band pass kHz 1 KHz Consumption mA 200 Sensitivity creep on compensated range %/°C 0.01 Zero creep on compensated range %Em/°C 0.005 Linearity & hysteresis deviation % EM < 0.2 standard < 0.1 option Sealing IP 54 Capacity Nm 100, 200, 500, 1000, 2000, 4000, 10000, 20000 Speed measurement Pulses/tour 60 option Output signal Vdc ± 5 VDC standard Frequency 60 to 140 KHz for: -Capacity...+Capacity (option) ±10 VDC (option) Operating temperature °C 0 to +70 (32°F to 160°F) Compensated temperature °C +10 to +60 (14°F to 140°F) Excitation voltage V 16...30 VDC Options Option N : Rotation speed measurement Option F : Output frequency signal TECHNIQUES MODERNES D'EXTENSOMETRIE Parc d'activités de Signes - B.P. 734 - 83030 TOULON Cedex 9 Tel. 04.94.10.00.51 - Fax 04.94.10.00.52 Specifications are subject to change without notice Page 1

Open the catalog to page 1

Tap view built.In plug

Open the catalog to page 2

DF 2Pages

Catalog excerpts

All TME catalogs and technical brochures

DF
2Pages