EDGE PROTECTION SYSTEM - EPS
12Pages

Swedish-Polish manufacturer with companies operating in Poland, Sweden, Germany and the UK More than 15 years of experience in manufacturing stairs and steel platforms as well as construction safety systems In-house engineering and technological offices as well as a research and development department Modern and fully automated machinery park Highly qualified engineering, technical and production staff Comprehensive Customer service: design, manufacturing, sales, rental, transportation, assembly and repair services delivered all across Europe The manufacturer holds TÜV SÜD Poland...

Edge Protection System is a modern security system which is made in compliance with EN 13374:2013 standard. It is dedicated to secure building and construction site edges, technological openings, passageways and other places where there is risk of falling from height. Now screw assembly system thanks to trigger relase mechanism EPS received a positive opinion of Mechanised Construction and Pock Mining Institute for compliance with EN 13374:2013. System was designed and examined (A-class) Innovative CLICK system – an embossed channel which fits the ratchet system. The elements are connected...

Formwork girder

System post EPS-SL-V3* PAGE 11 * - Element compatible with drop-in EA II M12 anchor and Fisher FSA 12x85/25 S anchor Wooden box pallet PAGE 19 ** - The element was tested for compliance with EN 13374:2013, and has the certificate of conformity no. Z/02/003/18

System post with two fixed universal holders and additional toe board holder. Suitable for all railing types. Additional holder for plank toe board Mesh panel is made of welded steel rods every 50mm. The lower toe board made of denser-spaced bars. Possibility of manufacturing a steel overlay for the lower toe board, powder-coat or add client’s logo on request. Timber planks in 2500 x 150 mm dimension. The maximum span between the posts is 2000 mm. Available with client’s logo on request. Post extension - available in two sizes: 190 and 250 mm. It allows to maintain the required height of...

Horizontal screw-fastened holder Girder holder - suitable for every girder height with maximum width of the upper T being 95 mm. Click-fit fastener – special channel embossed in pipe that fits the click fastener system Vertical screw-fastened holder - designed to avoid interference with most of the construction works. Holder for steel structure to improve clamping of the holder equipped in teeth fostening edges.

Latching holder Stair holder - the holder construction allows to clamp items from 15 to 330 mm thick. Clamping holder L500/L800 - universal solution used in numerous configurations. It allows assembly Horizontal permanent holder resistant to most of the materials used at the construction site, e.g. without compromising the structural element. concrete mixture, cream of lime, etc.

Vertical permanent holder resistant to most of the materials used in construction sector, e.g. concrete Plank lower holder additional element used with wooden plank protection. mixture, cream of lime, etc. Drop-in holder designed to ensure high resistance to dynamic forces. Working platform holder - the holders must always be used in sets of two assembled opposite each other.

Transport basket SD1 / SD3 / SD2- are equipped with upper crane transport and multi-stacking corners Wall holder - additional element used for barrier protection. as well as base forklift holders. The SD1 and SD3 baskets are dedicated for small EPS elements and equipped with reinforced mesh walls. SD2 is dedicated for bigger elements (planks, mesh panels), equipped with mesh walls that protect the elements from sliding and open sides for better access. Baskets were designed according to crane’s guidelines. UCHWYT EPS-UDS Formwork girder - allows for formwork operations on edges that...