*mydirectindustry

S-type

Product catalog summary

Specifications:
The hinge features an opening angle of 110°, with a hinge cup drilling diameter of 35mm and a depth of 11.5mm. It uses an ST plate mounting system, allowing side adjustments of +3/-1mm, height adjustments of +2/-2mm, and depth adjustments of +5/-1.5mm.

Mounting Details:
Mounting plate thickness and drilling distances, along with door clearance details, are elaborated on page 3.7. Drawings illustrate applications for various mounting plate thicknesses.

Accessories:
Soft closing systems and cover caps for hinge arms are detailed on pages 3.14 to 3.16 and page 3.145. Glissando TL and CR systems are referenced on pages 2.11 and 2.15.

Mounting Plates:
Options include steel and zinc diecast mounting plates, with specifics on page 3.75. Cam adjustable mounting plates are detailed on page 3.73, and face frame adapters are discussed on page 3.77.

Adjustments:
Diagonal adjustments are possible by rotating the appropriate screw, as shown in the drawings. Height adjustments are +/- 2mm, with pre-mounted options for various screw types.

Additional Notes:
The document includes a legend for hinge cup symbols and mounting plate type symbols. Special requests for certain items are available as noted on page 0.3.

Catalog excerpts

S-Type Glissando plus 110 2nd Generation • angle 110˚ Opening • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system ST Item number Drilling patterns for hinge cups > see page 3.10 Made of steel and plastic Drilling patterns for hinge cups > see page 3.10 Made of steel and plastic Mounting plates Cam adjustable mounting plate > see page 3.73 Steel mounting plates > see page 3.75 Legend of hinge cup symbols Hinge cup screws If not pre-mounted Zinc diecast mounting plates > see page 3.75 Face frame adapters > see page 3.77 Accessories Cover caps for hinge arm > see page 3.145 Screw-on ready

Open the catalog to page 1

Damping adjustment Door adjustment Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping Mounting plate drilling distance F>Fmin F>Fmin Drawings show application on D=0mm thick mounting plate Mounting plate thickness table For further explanation > see page 3.7 For further explanation > see pages 3.14 - 3.16 For further explanation > see page 3.19 Mounting details Concealed hinges Drawings show application on D=0mm thick mounting plate Door clearance For further explanation > see page 3.7 Recommended number per door and positioning height (cm) For further explanation > see page...

Open the catalog to page 2

S-Type Glissando 110 2nd Generation • angle 110˚ Opening • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system ST Item number Item number Drilling patterns for hinge cups > see page 3.10 Made of steel and plastic 28 Drilling patterns for hinge cups > see page 3.10 Made of steel and plastic Drilling patterns for hinge cups > see page 3.10 Made of steel and plastic Mounting plates Steel mounting plates > see page 3.75 Legend of hinge cup symbols Hinge cup screws If not pre-mounted Cam adjustable mounting plate > see page 3.73 Zinc diecast mounting plates...

Open the catalog to page 3

Damping adjustment Door adjustment Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping For further explanation > see pages 3.14 - 3.16 For further explanation > see page 3.19 Mounting details Mounting plate drilling distance 17.8 F>2Fmin Drawings show x application on D=0mm thick mounting plate Drawings show V application on D=0mm thick mounting plate Mounting plate thickness table For further explanation > see page 3.7 Concealed hinges Drawings show application on D=0mm 25 thick mounting plate Door clearance For further explanation > see page 3.7 Recommended number per door...

Open the catalog to page 4

S~Typ© GMsSdndO 30° an9'ed application for wooden doors // --- • Drilling diameter for hinge I I** • Hinge on plate mounting s Cup made of steel and plastic, arm made of zinc Mounting plates Legend of hinge cup symbols mounting plate L**' >-> Steel mounting plates Zinc diecast mounting plates Cover caps for hinge arm

Open the catalog to page 5

Door adjustment Damping adjustment Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping Mounting details L=37 for thickness D=0 L=36 for thickness D=1 L=35 for thickness D=2 L=34 for thickness D=3 L=31 for thickness D=9 Drawings show application on D=3mm thick mounting plate Mounting plate thickness table For further explanation > see page 3.7 Mounting plate drilling distance For further explanation > see pages 3.14 - 3.16 For further explanation > see page 3.19 Concealed hinges Drawings show application on D=3mm thick mounting plate Door clearance For further explanation > see...

Open the catalog to page 6

S-Type Glissando 110/45° 2nd Generation 45° angled application for wooden doors • angle 110˚ Opening • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system ST Item number Drilling patterns for hinge cups > see page 3.10 Cup made of steel and plastic, arm made of zinc Mounting plates Cam adjustable mounting plate > see page 3.73 Steel mounting plates > see page 3.75 Legend of hinge cup symbols Hinge cup screws If not pre-mounted 6.9 Accessories Zinc diecast mounting plates > see page 3.75 Cover caps for hinge arm > see page 3.145

Open the catalog to page 7

Damping adjustment Door adjustment Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping Drawings show application on D=3mm thick mounting plate L=36 for thickness D=0 L=35 for thickness D=1 L=34 for thickness D=2 L=33 for thickness D=3 Mounting plate thickness table For further explanation > see page 3.7 Mounting plate drilling distance Concealed hinges For further explanation > see pages 3.14 - 3.16 For further explanation > see page 3.19 Mounting details Drawings show application on D=3mm thick mounting plate Recommended number per door and positioning Door clearance For further...

Open the catalog to page 8

S-Type Glissando 110/45° 2nd Generation 45° angled application for wooden doors • angle 110˚ Opening • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system ST Item number Drilling patterns for hinge cups > see page 3.10 Cup made of steel and plastic, arm made of zinc Hinge cup screws If not pre-mounted Cam adjustable mounting plate > see page 3.73 Steel mounting plates > see page 3.75 Legend of hinge cup symbols Zinc diecast mounting plates > see page 3.75 Face frame adapters > see page 3.77 Accessories Cover caps for hinge arm > see page 3.145

Open the catalog to page 9

Damping adjustment Door adjustment Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping For further explanation > see pages 3.14 - 3.16 For further explanation > see page 3.19 Mounting details Mounting plate drilling distance Mounting plate thickness table For further explanation > see page 3.7 Concealed hinges Drawings show application on D=0mm thick mounting plate Drawings show application on D=18mm thick mounting plate Door clearance For further explanation > see page 3.7 Recommended number per door and positioning height (cm) For further explanation > see page 3

Open the catalog to page 10

S-type

S-type

Catalog excerpts

All Titus Group catalogs and technical brochures

Archived catalogs