*mydirectindustry

Catalogs
Titus Group
2016 B-type

2016 B-type

Product catalog summary

Overview

This document provides comprehensive technical specifications, mounting instructions, adjustment parameters, and accessory details for B-Type Glissando 2nd Generation concealed hinges primarily designed for wooden doors, with some references to aluminum frame doors. It covers multiple hinge models featuring various opening angles and cranking options, along with compatible mounting plates and accessories.

1. Specifications

Opening Angles: Standard 110° for most models; additional angled variants include 110/30°, 110/45°, 110/90°, and adjustable ranges between 135°-165° for specialized applications.
Hinge Cup: Diameter fixed at 35 mm; minimum drilling depth ranges from 11 mm to 12 mm depending on hinge type.
Mounting System: Slide-on hinge-on-plate system using steel or zinc diecast mounting plates.
Materials: Hinge cups made of steel or zinc; arms constructed from zinc or steel depending on model.
Cranking Options: Available in 0 mm, 9 mm, and 15 mm cranking variants to accommodate different door configurations.
Packaging: Hinges supplied in bulk packs of 100 or 200 pieces depending on model.

2. Mounting Plates and Accessories

Mounting Plates: Steel and zinc diecast plates with thicknesses ranging from 0 mm up to 22 mm, with detailed tables correlating thickness to drilling distances for precise installation.
Compatibility: Certain mounting plates are specific to hinge types, e.g., blind panel mounting plates for B-Type-i 110/90° hinges.
Accessories: Cover caps for hinge arms, push latches, soft closing systems (Glissando TL, Glissando 170), and hinge cup screws (available separately in bulk) are referenced with page numbers for ordering and installation guidance.

3. Mounting and Adjustment Parameters

Adjustment Ranges: Side adjustment +3/-0.5 mm (or +3/-1 mm depending on hinge), height adjustment ±2 mm, depth adjustment +4/-0 mm (or +5/-1.5 mm for some models), and diagonal adjustment via specific screws for precise door alignment.
Door Clearance: Minimum gap (ZMIN) ranges from 0 mm to 0.5 mm depending on hinge and mounting plate configuration, ensuring proper door function.
Drilling Patterns: Standardized drilling patterns for hinge cups (35 mm diameter) and mounting plates are provided, with detailed tables for drilling distances and plate thicknesses to ensure accurate installation.

4. Damping Features

Hinges include an adjustable damping force mechanism controlled by a damping reduction switch.
Factory setting is maximum damping force; users can reduce damping by lifting the damping activator and sliding the switch to the opposite position, allowing fine-tuning of door closing speed and force.
Recommended hinge quantity and positioning per door are provided to optimize damping performance.

5. Symbols and Legends

Comprehensive legends explain hinge cup symbols (e.g., K, x, V, S, L, D, P), mounting plate types, screw readiness, machine insertion readiness, and cranking options.
Symbols assist in identifying hinge and mounting plate compatibility and ordering.

6. Usage Recommendations and Limitations

Hinges are designed exclusively for wooden doors, with some models compatible with aluminum frame doors and blind panels.
Minimum drilling diameters and depths must be strictly followed to ensure proper hinge function.
Mounting plates have minimum panel thickness requirements (e.g., 15 mm) and are restricted to specific hinge types.
Adjustment limits must be respected to maintain door alignment and hinge performance.

7. Summary of Key Parameters

Parameter	Value
Hinge Cup Diameter	35 mm
Minimum Drilling Depth	11 - 12 mm
Opening Angles	110°, 110/30°, 110/45°, 110/90°, adjustable 135°-165°
Side Adjustment	+3/-0.5 mm or +3/-1 mm
Height Adjustment	±2 mm
Depth Adjustment	+4/-0 mm or +5/-1.5 mm
Mounting Plate Thickness Range	0 mm to 22 mm
Minimum Panel Thickness for Mounting Plates	15 mm
Damping Force	Adjustable via reduction switch; factory preset to maximum
Minimum Door Gap (ZMIN)	0 - 0.5 mm

8. References to Additional Documentation

Mounting plate details and drilling patterns: pages 3.7, 3.10, 3.117
Adjustment and damping details: pages 3.13, 3.14-3.16, 3.19
Accessories such as cover caps and push latches: pages 3.145, 3.147
Soft closing systems: pages 2.11, 2.13, 2.15

Conclusion

This document serves as a detailed technical guide for the selection, installation, adjustment, and maintenance of B-Type Glissando concealed hinges and compatible mounting plates. It emphasizes precision in drilling, mounting plate selection, and adjustment capabilities—including damping force—to ensure optimal door performance across various angled applications. The inclusion of comprehensive tables, symbols, and accessory references facilitates accurate ordering and installation for wooden and select aluminum frame doors.

Catalog excerpts

B-Type Glissando 110 2nd Generation • angle 110˚ Opening • Drilling diameter for hinge cup 35mm • Drilling depth min 11mm slide-on • Hinge on plate mounting system Item number Item number Drilling patterns for hinge cups > see page 3.10 Made of steel and plastic Drilling patterns for hinge cups > see page 3.10 Made of steel and plastic Drilling patterns for hinge cups > see page 3.10 Made of steel and plastic Mounting plates Steel mounting plates > see page 3.117 Zinc diecast mounting plates > see page 3.117 Legend of hinge cup symbols Hinge cup screws If not pre-mounted Accessories Cover caps for hinge arm > see page 3.145

Open the catalog to page 1

Damping adjustment Door adjustment Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping For further explanation > see page 3.19 Drawings show x application on D=0mm V thick mounting plate 7 Mounting plate thickness table For further explanation > see page 3.7 Mounting plate drilling distance Drawings show application on D=0mm thick mounting plate For further explanation > see pages 3.14 - 3.16 Concealed hinges Drawings show F>Fmin application on D=3mm thick mounting plate Door clearance For further explanation > see page 3.7 Recommended number per door and positioning For further...

Open the catalog to page 2

B-Type Glissando 110/30° 2nd Generation 30° angled application for wooden doors • angle 110˚ Opening • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system slide-on Item number Drilling patterns for hinge cups > see page 3.10 Cup made of steel and plastic, arm made of zinc Steel mounting plates > see page 3.117 Zinc diecast mounting plates > see page 3.117 Legend of hinge cup symbols Hinge cup screws If not pre-mounted Mounting plates Accessories Cover caps for hinge arm > see page 3.145

Open the catalog to page 3

Damping adjustment Door adjustment Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping For further explanation > see page 3.19 Mounting plate drilling distance Drawings show application on D=3mm 38.5 thick mounting plate L=37 for thickness D=0 L=36 for thickness D=1 L=35 for thickness D=2 L=34 for thickness D=3 L=31 for thickness D=9 Drawings show application on D=3mm thick mounting plate Mounting plate thickness table For further explanation > see page 3.7 For further explanation > see pages 3.14 - 3.16 Concealed hinges Door clearance For further explanation > see page 3.7 Recommended...

Open the catalog to page 4

B-Type Glissando 110/45° 2nd Generation 45° angled application for wooden doors • angle 110˚ Opening • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system slide-on Technical details Item number Drilling patterns for hinge cups > see page 3.10 Cup made of steel and plastic, arm made of zinc Steel mounting plates > see page 3.117 Zinc diecast mounting plates > see page 3.117 Legend of hinge cup symbols Hinge cup screws If not pre-mounted Mounting plates Accessories Cover caps for hinge arm > see page 3.145

Open the catalog to page 5

Damping adjustment Door adjustment Turn towards '+' to increase and towards '-' to decrease the damping Mounting plate drilling distance Mounting plate thickness table Drawings show thick mounting plate Drawings show thick mounting plate Recommended number Door clearance

Open the catalog to page 6

B-Type Glissando 110/45° 2nd Generation 45° angled application for wooden doors • angle 110˚ Opening • Drilling diameter for hinge cup 35mm • Drilling depth min. 11mm • Hinge on plate mounting system slide-on Technical details Item number Drilling patterns for hinge cups > see page 3.10 Cup made of steel and plastic, arm made of zinc Hinge cup screws If not pre-mounted Mounting plates Steel mounting plates > see page 3.117 Zinc diecast mounting plates > see page 3.117 Legend of hinge cup symbols Accessories Cover caps for hinge arm > see page 3.145

Open the catalog to page 7

Door adjustment Damping adjustment Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping For further explanation > see pages 3.14 - 3.16 For further explanation > see page 3.19 Mounting details Mounting plate drilling distance Mounting plate thickness table For further explanation > see page 3.7 Concealed hinges Drawings show application on D=0mm thick mounting plate 19 Drawings show application on D=18mm thick mounting plate Recommended number per door and positioning Door clearance For further explanation > see page 3.7 For further explanation > see page 3

Open the catalog to page 8

B-Type Glissando 110/90° 2nd Generation For wooden door cabinets with blind panels • angle 110˚ Opening • Drilling diameter for hinge cup 35mm min. 11mm • Drilling depth • Hinge on plate mounting system slide-on Cup or mounting plate type Technical details Item number Drilling patterns for hinge cups > see page 3.10 Cup made of steel and plastic, arm made of zinc Blind panel mounting plate This mounting plate can be used only with B-Type-i 110/90° hinges. Information about mounting plate symbols > see page 3.118 Mounting plates Legend of hinge cup symbols Hinge cup screws If not pre-mounted These...

Open the catalog to page 9

Damping adjustment Door adjustment Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping For further explanation > see page 3.19 Mounting details Concealed hinges For further explanation > see pages 3.14 - 3.16 Mounting plate drilling distance Door clearance For further explanation > see page 3.7 Recommended number per door and positioning height (cm) For further explanation > see page 3.13

Open the catalog to page 10

• angle 110˚ Opening • Drilling diameter for hinge cup 35mm • Drilling depth min 11mm • Hinge on plate mounting system slide-on Item number Item number Drilling patterns for hinge cups > see page 3.10 Made of steel and plastic Drilling patterns for hinge cups > see page 3.10 Made of steel and plastic Drilling patterns for hinge cups > see page 3.10 Made of steel and plastic Hinge cup screws If not pre-mounted Mounting plates Steel mounting plates > see page 3.117 Zinc diecast mounting plates > see page 3.117 Legend of hinge cup symbols Accessories Cover caps for hinge arm > see page 3.145

Open the catalog to page 11

All Titus Group catalogs and technical brochures

Archived catalogs

2019 B-type Hinges
42 Pages
2021 B-type Hinges
46 Pages