TECHNICAL PRODUCT PI_Pulse and Analog Converter • Outputs: 4-20mA (active), 0-5Vdc or 0-10Vdc, NPN and PNP logic direct outputs • Output test signals via software • Inputs: Pulse or Reed switch inputs • Inbuilt sensor power supply (+5Vdc) • Analog response rate from 100ms • Inbuilt Linearisation • User programmable settings; easy access USB • Up to 10 Calibration point input values • ASCII data streaming of flow measurement • Software indication for system set up • Configurable flow alarm outputs • LED indicators with LCD display option • Display indicates rate / total / both; local & remote reset • IP64 Enclosure; Wall or panel mounting Titan's programmable Pulsite® Link, now available with an LCD display option, allows the user to convert standard pulse output flow meters to give linearised analog and NPN/PNP outputs. The device will accept both pulse and reed switch devices and provides 5Vdc to the installed flow meter. The display model enables local indication of flow rate, total or both, from the installed pulse flowmeter. A local and remote reset for the totaliser is also featured with the display option. Titan's Interface Software allows the user to configure and test the system via USB and a computer. Calibration data can be entered in order to linearise the flowmeter signal for greater accuracy. There is easy access to the USB connection to allow adjustment of settings without the need to uninstall the unit. The USB connection via the base port offers datalogging of paramenters via PC and Titan's Interface Software. ASCII flow information can be directly received from the USB connection to ease installation for computer information systems if required. • Increased accuracy on mechanical device • Data monitoring / Datalogging • Test rigs • Control systems • Flow alarms Ordering Codes Pulsite® Link (Pulse and Analog Converter) 370-008 (without display) 370-009 (with display)

Ilian TECHNICAL SPECIFICATIONS Input Pulse Output Sensor Supply Reed Switch Pulse NPN/PNP ASCII flow data stream 3 types pulse width Pulse and Analog 5Vdc 2.5kHz pull-up/down resistor required; 24V@20mA max. Scalable pulse per litre 16bit; Adjustable flow range 16bit; Adjustable flow range Automatic, 100ms, 1s or 10s option in software min. 0.1ms pulse width Frequency 50:50; Direct 50:50; Direct fixed width 10 point With flow indicators gal, kg, gm, ltr, ml; per sec, min, hr 6x8mm high main characters; 2.5mm enunciators Analog Output Terminals - jouOut OUjO^+ulNK^,„C( ^ JriOuiivet?i. Jhi\alogftjtl...