TECHNICAL PRODUCT DATA SHEET These compact rugged oval gear flowmeters are designed to give high performance with a low cost of ownership. These meters are capable of measuring simple water-like liquids as well as lubricating fluids. There are several models; some with totally non-metallic wetted components, PEEK, ceramic and a choice of elastomer, which makes these the ideal choice for the metering of aggressive chemicals. The standard inlet and outlet are BSP or NPT female threads, and flanges are also available on special orders. For OEMs, alternatives are available, including manifold mountings. The standard models are 316 St St, aluminium, and PEEK. For hazardous areas either the Namur sensor or the reed switch (simple apparatus) may be used. • Engine test • High viscosity liquids • Hazardous areas • Excellent chemical resistance • Rugged construction • Individual calibration • High viscosity capability • No flow conditioning required • Compact meter assembly • Hall, reed switch or Namur sensor • Good accuracy • Non-metallic options • High Pressure 700 bar on selected&

Oval Gear Flow Meters Overview Ilian Ordering Codes Model The order code is preceded by the flow meter size eg OG4* Body Material Temp Rating S = 80°C / 158°F T = 100°C / 212°F U = 150°C / 300°F Pressure Rating 5 = 50 bar 750 PSI (St St) Seal Material V = Viton™ N = Nitrile E = EPDM K = Kalrez® Detector Type H = Hall Effect R = Reed Switch & Resistor N = Namur R = Reed Switch (hazardous area) Process Fitting Size Proces Fitting Type * Refer to specific Oval Gear data sheets for order codes relating to the required model At the heart of the meter are a pair of toothed oval gears one of which contains...