Catalogs >
Titan Enterprises >
OG7 500L/Min Oval Gear Meter

OG7 500L/Min Oval Gear Meter
2Pages

Catalog excerpts

TECHNICAL PRODUCT DATA SHEET Ilian OG7 500L/Min Oval Gear Meter The rugged OG7 oval gear flowmeter is designed to give high performance with a low cost of ownership. It has a standard flow range from 5 to 500 L/min on 30 cSt oil and 20 to 500 L/min on water like liquids. The standard inlet and outlet are 2” female threads. For OEM use other alternatives, including manifold mountings, are available. The standard model is 316 St St with Viton® ‘O’ ring seal. At the heart of the meter are a pair of toothed oval gears one of which contains chemically resistant magnets. Rotation is detected through the chamber wall by a Hall effect detector or a reed switch giving approximately 15 pulses per litre passed. The output is an NPN pulse or a voltage free contact closure either of which is readily interfaced with most electronic display or recording devices. This combination of materials and technology ensures a long life product with reliable, accurate operation throughout. • Engine test • Oil flow • High viscosity fluids • OEM equipment • Hazardous areas FEATURES • Excellent chemical resistance • Rugged construction • Individual calibration • High viscosity capability • Low pressure loss • No flow conditioning required • Hall, reed switch or Namur sensor • Accuracy 1.0% reading water 0.5% reading oil (30 cSt) • ±0.5% reading * • 0.1% repeatability • IP67/NEMA 4 protection * When used with our metra-smart instrument

Open the catalog to page 1

OG7 500L/Min Oval Gear Meter TECHNICAL SPECIFICATIONS Sample product codes º Stainless standard OG7-SS5-VHD-B Flow range e.g. OG7-SS5-VHD-B is a stainless steel meter rated at 80°C, 50 Bar, Viton™ seal, Hall effect detector and a 2” BSP thread. – Body – Gears – Seal – Magnet 316 St St Carbon filled PEEK Viton® Ceramic Detector Type Hall effect Terminations P67 Approx ‘K’ factor – Pulses/Litre Model OG7 Body material S = 316 St St 50 bar std Temp rating S = 80°C / 158°F T = 100°C / 212°F U = 150°C / 300°F Pressure rating 5 = 50 Bar 750 PSI Seal Material V = Viton® N = Nitrile E = EPDM K =...

Open the catalog to page 2

OG7 500L/Min Oval Gear Meter 2Pages

Catalog excerpts

All Titan Enterprises catalogs and technical brochures

OG7 500L/Min Oval Gear Meter
2Pages