OG6 200L/Min Oval Gear Meter


Catalog excerpts

OG6 200L/Min Oval Gear Meter - 1

TECHNICAL PRODUCT DATA SHEET OG6 200L/Min Oval Gear Meter The rugged OG6 oval gear flowmeter is designed to give high performance with a low cost of ownership. It has a standard flow range from 2.0 to 200 L/min on 30 cSt oil and 10 to 200 L/min on water like liquids. The standard inlet and outlet are 1½” female threads. For OEM use alternatives, including manifold mountings, are available. The standard models are 316 St St or Aluminium with Viton® ‘O’ ring seals. At the heart of the meter are a pair of toothed oval gears one of which contains chemically resistant magnets. Rotation is detected through the chamber wall by a Hall effect detector or a reed switch giving approximately 21 pulses per litre passed. The output is an NPN pulse or a voltage free contact closure either of which is readily interfaced with most electronic display or recording devices. This combination of materials and technology ensures a long life product with reliable, accurate operation throughout. IDEAL FOR • Engine test • Oil flow • High viscosity fluids • OEM equipment • Hazardous areas OG6 30cStk oil ‘K’ Factor vs Flow rate 21.8 21.7 Flow L/minute FEATURES • Excellent chemical resistance • Rugged construction • Individual calibration • High viscosity capability • Low pressure loss • No flow conditioning required • Hall, reed switch or Namur sensor • Accuracy 1.0% reading water 0.5% reading oil (30 cSt) • ±0.5% reading * • 0.1% repeatability • IP67/NEMA 4 protection • Models to 400 Bar

Open the catalog to page 1
OG6 200L/Min Oval Gear Meter - 2

OG6 200L/Min Oval Gear Meter TECHNICAL SPECIFICATIONS Sample product codes º Stainless standard Aluminium standard OG6-SS5-VHP-B OG6-AS1-VHP-B Flow range e.g. OG6-SS5-VHP-B is a stainless steel meter rated at 80°C, 50 Bar, Viton® seal, Hall effect detector and a 11/2” BSP thread. 316 St St Carbon filled PEEK Viton® Ceramic – Water ± 1.0% Reading – 30 cSt oil ± 0.5% Reading 10 - 200 L/min 2.0 - 200 L/min Aluminium Carbon filled PEEK Viton® Ceramic ± 1.0% Reading ± 0.5% Reading Detector Type Hall effect Hall effect Terminations Terminal block P67 cable gland Terminal block P67 cable gland...

Open the catalog to page 2

All Titan Enterprises catalogs and technical brochures

  1. Atrato 8pp

    8 Pages

  2. Atrato

    8 Pages

  3. Metra-Clear

    2 Pages