TECHNICAL PRODUCT DATA SHEET Ilian OG6 200L/Min Oval Gear Meter The rugged OG6 oval gear flowmeter is designed to give high performance with a low cost of ownership. It has a standard flow range from 2.0 to 200 L/min on 30 cSt oil and 10 to 200 L/min on water-like liquids. The standard inlet and outlet are 11/?” female threads. For OEMs, alternatives are available, including manifold mountings. The standard models are 316 St St or Aluminium with Viton™ ‘O’ ring seals. At the heart of the meter are a pair of toothed oval gears one of which contains chemically resistant magnets. Rotation is detected through the chamber wall by a Hall effect detector or a reed switch giving approximately 21 pulses per litre passed. The output is an NPN pulse or a voltage free contact closure either of which is readily interfaced with most electronic display or recording devices. This combination of materials and technology ensures a long life product with reliable, accurate operation throughout. • Engine test • High viscosity liquids • Hazardous areas • Excellent chemical resistance • Rugged construction • Individual calibration • No flow conditioning required • Hall, reed switch or Namur sensor • Accuracy 1.0% reading water

OG6 200L/Min Oval Gear Meter TECHNICAL SPECIFICATIONS Sample product codes Stainless standard Aluminium standard OG6-SS5-VHP-B OG6-AS1-VHP-B Flow range Wetted materials – Body 316 St St – Gears Carbon filled PEEK – Seal Viton™ – Magnet PTFE - Spindles St St Aluminium Carbon filled PEEK Viton ™ PTFE St St – Water ± 1.0% Reading – 30 cSt oil ± 0.5% Reading Ordering Codes Detector Type Hall effect Hall effect Terminations Terminal block P65 cable gland Terminal block P65 cable gland Approx ‘K’ factor 21 21 (Pulses/Litre) Viscosity Range 1-1000 cSt Model OG6 Body Material S = 316 St St 50 bar std...