OG5 Oval Gear Meter
2Pages

{{requestButtons}}

Catalog excerpts

OG5 Oval Gear Meter - 1

TECHNICAL PRODUCT DATA SHEET OG5 100L/Min Oval Gear Meter The compact rugged OG5 oval gear flowmeter is designed to give high performance with a low cost of ownership.It has a standard flow range from 0.5 to 100 L/min on 30 cSt oil and 4 to 100 L/min on water like liquids. It can have totally nonmetallic wetted components, PEEK, ceramic and an elastomer which makes this the ideal choice for the metering of aggressive chemicals. The standard inlet and outlet are 1” female threads. For OEM use alternatives, including manifold mountings, are available. The standard model is 316 St St with Viton® ‘O’ ring seal. At the heart of the meter are a pair of toothed oval gears one of which contains chemically resistant magnets. Rotation is detected through the chamber wall by a Hall Effect detector or a reed switch giving approximately 78 pulses per litre passed. The output is an NPN pulse or a voltage free contact closure either of which is readily interfaced with most electronic display or recording devices. This combination of materials and technology ensures a long life product with reliable, accurate operation throughout. IDEAL FOR • Engine test • Oil flow • High viscosity fluids • OEM equipment • Hazardous areas Flow L/minute FEATURES • Excellent chemical resistance • Rugged construction • Individual calibration • High viscosity capability • Low pressure loss • No flow conditioning required • Compact meter assembly • Hall, reed switch or Namur sensor • Accuracy 0.75% reading water 0.5% reading oil (30 cSt) • ±0.25% reading * • 0.1% repeatability • IP67/NEMA 4 protection • Models to 400 Ba

Open the catalog to page 1
OG5 Oval Gear Meter - 2

OG5 100L/Min Oval Gear Meter Ilian TECHNICAL SPECIFICATIONS Sample product Stainless Aluminium PEEK codes - standard standard standard Ordering codes Model OG5 Body material S = 316 St St 50 Bar std A = Aluminium 10 Bar max P = PEEK H = Hastelloy C Temp rating S = 80°C / 158°F T = 100°C / 212°F U = 150°C / 300°F Pressure rating 5 = 50 Bar 750 PSI (St St) 1 = 10 Bar 150 PSI (Al / PEEK) 4 = 400 Bar 5880 PSI (St St) Seal Material V = Viton® N = Nitrile E = EPDM P = PTFE (50Bar max) K = Kalrez® Detector Type H = Hall effect R = Reed Switch & Resistor N = Namur X = Reed Switch (Hazardous area)...

Open the catalog to page 2

All Titan Enterprises catalogs and technical brochures

  1. Atrato 8pp

    8 Pages

  2. Atrato

    8 Pages

  3. Metra-Clear

    2 Pages