OG4 50L/Min Oval Gear Meter


Catalog excerpts

OG4 50L/Min Oval Gear Meter - 1

TECHNICAL PRODUCT DATA SHEET OG4 50L/Min Oval Gear Meter The compact rugged OG4 oval gear flowmeter is designed to give high performance with a low cost of ownership. It has a standard flow range from 0.25 to 50 L/min on 30 cSt oil and 2.5 to 50 L/min on water like liquids. It can have totally non-metallic wetted components, PEEK, ceramic and an elastomer which makes this the ideal choice for the metering of aggressive chemicals. The standard inlet and outlet are ¾” female threads. For OEM use alternatives, including manifold mountings, are available. The standard model is 316 St St with Viton® ‘O’ ring seal. At the heart of the meter are a pair of toothed oval gears one of which contains chemically resistant magnets, the gears rotate freely on robust bearings. Rotation is detected through the chamber wall by a Hall effect detector or a reed switch giving approximately 115 pulses per litre passed. The output is an NPN pulse or a voltage free contact closure either of which is readily interfaced with most electronic display or recording devices. This combination of materials and technology ensures a long life product with reliable, accurate operation throughout. IDEAL FOR • Engine test • Oil flow • High viscosity fluids • OEM equipment • Hazardous areas OG4 30cStk oil ‘K’ Factor vs Flow rate 98.0 97.5 Flow L/minute FEATURES • Excellent chemical resistance • Rugged construction • Individual calibration • High viscosity capability • Low pressure loss • No flow conditioning required • Compact meter assembly • Hall, reed switch or Namur sensor • Accuracy 1.0% reading water 0.5% reading oil (30 cSt) • ±0.50% reading * • 0.1% repeatability • IP67/NEMA 4 protection • Models to 700 Bar • Non-metallic option * When used with our metra-smart instrume

Open the catalog to page 1
OG4 50L/Min Oval Gear Meter - 2

OG4 50L/Min Oval Gear Meter Ilian TECHNICAL SPECIFICATIONS Sample product codes - Stainless Aluminium PEEK standard standard standard Ordering codes Model OG4 Body material S = 316 St St 50 Bar std A = Aluminium 10 Bar max P = PEEK 10 Bar max H = Hastelloy C Temp rating S = 80°C / 158°F T = 100°C / 212°F U = 150°C / 300°F Pressure rating 5 = 50 Bar 750 PSI (St St) 1 = 10 Bar 150 PSI (Al / PEEK) 4 = 400 Bar 5880 PSI (St St) 7 = 700 Bar 10150 PSI (St St) Seal Material V = Viton® N = Nitrile E = EPDM P = PTFE (50 Bar max) K = Kalrez® Detector Type H = Hall effect R = Reed switch & Resistor N =...

Open the catalog to page 2

All Titan Enterprises catalogs and technical brochures

  1. Atrato 8pp

    8 Pages

  2. Atrato

    8 Pages

  3. Metra-Clear

    2 Pages