OG3 10L/Min Oval Gear Meter
2Pages

{{requestButtons}}

Catalog excerpts

OG3 10L/Min Oval Gear Meter - 1

TECHNICAL PRODUCT DATA SHEET The compact rugged OG3 oval gear flowmeter is designed to give high performance with a low cost of ownership. It has a standard flow range from 0.05 to 10 L/Min on 30 cSt oil and 0.5 to 10 L/min on water like liquids. It can have totally non-metallic wetted components, PEEK, ceramic and an elastomer which makes this the ideal choice for the metering of aggressive chemicals. The standard inlet and outlet are ^” female threads. For OEM use alternatives, including manifold mountings, are available. The standard model is 316 St St with Viton® ‘O’ ring seal. At the heart of the meter are a pair of toothed oval gears one of which contains chemically resistant magnets. Rotation is detected through the chamber wall by a Hall effect detector or a reed switch giving approximately 440 pulses per litre passed. The output is an NPN pulse or a voltage free contact closure either of which is readily interfaced with most electronic display or recording devices. This combination of materials and technology ensures a long life product with reliable, accurate operation throughout. • Engine test • Critical oil flow • High viscosity fluids • OEM equipment • Hazardous areas OG3 30cStk oil K Factor vs Flow rate Flow L/minute • Excellent chemical resistance • Rugged construction • Individual calibration • High viscosity capability • Low pressure loss • No flow conditioning required • Compact meter assembly • Hall, reed switch or Namur sensor • Accuracy 0.5% FSD water 1.0% reading oil (30 cSt) • ±0.50% reading * • 0.1% repeatability • IP67/NEMA 4 protection • Models to 700Bar • Non-metallic option * When used with our Metra-Smart instrument

Open the catalog to page 1
OG3 10L/Min Oval Gear Meter - 2

OG3 10L/Min Oval Gear Meter Ilian TECHNICAL SPECIFICATIONS Sample product codes - Stainless Aluminium PEEK standard standard standard Ordering codes Model P = PEEK 10 Bar max H = Hastelloy C Temp rating S = 80°C / 158°F T = 100°C / 212°F U = 150°C / 300°F Pressure rating 5 = 50 Bar 750 PSI (St St) 1 = 10 Bar 150 PSI (Al / PEEK) 4 = 400 Bar 5880 PSI (St St) 7 = 700 Bar 10150 PSI (St St) Seal Material V = Viton® N = Nitrile E = EPDM P = PTFE (Max 50Bar) K = Kalrez® Detector Type H = Hall effect R = Reed Switch & Resistor N = Namur X = Reed Switch (Hazardous area) Pipe Thread H = 1/2” (OG3...

Open the catalog to page 2

All Titan Enterprises catalogs and technical brochures

  1. Atrato 8pp

    8 Pages

  2. Atrato

    8 Pages

  3. Metra-Clear

    2 Pages