1. Catalogs
  2. Titan Enterprises
  3. OG3 10L/Min Oval Gear Meter

OG3 10L/Min Oval Gear Meter
1 /2Pages

OG3 10L/Min Oval Gear Meter

OG3 10L/Min Oval Gear Meter
1 /2Pages

Catalog excerpts

OG3 10L/Min Oval Gear Meter-1

TECHNICAL PRODUCT DATA SHEET Ilian OG3 10L/Min Oval Gear Meter • Engine test • High viscosity liquids • Hazardous areas The compact rugged OG3 oval gear flowmeter is designed to give high performance with a low cost of ownership. It has a standard flow range from 0.05 to 10 L/Min on 30 cSt oil and 0.5 to 10 L/min on water-like liquids. It can have totally non-metallic wetted components, PEEK, PTFE encapsulated magnets and elastomer seals which makes this the ideal choice for the metering of aggressive chemicals. The standard inlet and outlet are ^” female threads. For OEMs, alternatives are available, including manifold mountings. The standard model is 316 St St with Viton™ ‘O’ ring seal. At the heart of the meter are a pair of toothed oval gears one of which contains chemically resistant magnets. Rotation is detected through the chamber wall by a Hall effect detector or a reed switch giving approximately 440 pulses per litre passed. The output is an NPN pulse or a voltage free contact closure either of which is readily interfaced with most electronic display or recording devices. This combination of materials and technology ensures a long life product with reliable, accurate operation throughout. FEATURES • Excellent chemical resistance • Rugged construction • Individual calibration • High viscosity options • No flow conditioning required • Compact meter assembly • Hall, reed switch or Namur sensor • Models to 700 bar (see High Pressure Data Sheet) • Non-metallic option

 Open the catalog to page 1
OG3 10L/Min Oval Gear Meter-2

OG3 10L/Min Oval Gear Meter TECHNICAL SPECIFICATIONS Sample product Stainless codes standard Aluminium standard PEEK standard Flow range –Water 0.5 - 10 L/min – 30 cSt Oil 0.05 - 10 L/min e.g. OG3-SS5-VHH-B is a stainless steel meter rated at 80°C, 50 bar, Viton™ seal, Hall effect detector and a 1/2” BSP thread. PEEK Carbon filled PEEK Viton™ PTFE Hastelloy C Accuracy – Water ± 0.5% FSD ± 0.5% FSD – 30 cSt oil ± 1.0% Reading ± 1.0% Reading Detector Type Hall effect Hall effect Hall effect Terminations Via M20 cable gland MIL style 4 Pin M12 instrument socket Approx ‘K’ factor 440 440 (Pulses/Litre)...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.