OG2 Oval Gear Meter


Catalog excerpts

OG2 Oval Gear Meter - 1

• Engine test • Oil flow • High viscosity fluids • OEM equipment • Hazardous areas The compact rugged OG2 oval gear flowmeter is designed to give high performance with a low cost of ownership. It has a standard flow range from 0.03 to 4 L/min on 30 cSt oil and 0.15 to 4 L/min on water like liquids. It can have totally non-metallic wetted components, PEEK™, ceramic and an elastomer which makes this the ideal choice for the metering of aggressive chemicals. The standard inlet and outlet are W” female threads. For OEM use alternatives, including manifold mountings, are available. The standard model is 316 St St with Viton™ ‘O’ ring seal. At the heart of the meter are a pair of toothed oval gears one of which contains chemically resistant magnets. Rotation is detected through the chamber wall by a Hall effect detector or a reed switch giving approximately 1100 pulses per litre passed. The output is an NPN pulse or a voltage free contact closure either of which is readily interfaced with most electronic display or recording devices. This combination of materials and technology ensures a long life product with reliable, accurate operation throughout. • Excellent chemical resistance • Rugged construction • Individual calibration • High viscosity capability • Low pressure loss • No flow conditioning required • Compact meter assembly • Hall, reed switch or Namur sensor • Accuracy 1.0% FSD water 0.75% FSD oil • ±0.5% reading * • 0.1% repeatability • IP67/NEMA 4 protection • Models to 700 Bar • Non-metallic option * When used with our metra-smart instrument

Open the catalog to page 1
OG2 Oval Gear Meter - 2

OG2 4L/Min Oval Gear Meter Ilian TECHNICAL SPECIFICATIONS Ordering codes Model OG2 Body material S = 316 St St 50 bar std P = PEEK 10 Bar max H = Hastelloy C Temp rating S = 80°C / 158°F T = 100°C / 212°F U = 150°C / 300°F Pressure rating 5 = 50 Bar 750 PSI (St St) 1 = 10 Bar 150 PSI (Al / PEEK 4 = 400 Bar 5880 PSI (St St) 7 = 700 Bar 10150 PSI (St St) Seal Material V = Viton® N = Nitrile E = EPDM P = PTFE (50 Bar max) K = Kalrez® Detector Type H = Hall effect R = Reed switch & Resistor N = Namur X = Reed switch (Hazardous area) Pipe Thread Q = 1/4” (OG2 std) Connections B = BSP F N = NPT...

Open the catalog to page 2

All Titan Enterprises catalogs and technical brochures

  1. Atrato 8pp

    8 Pages

  2. Atrato

    8 Pages

  3. Metra-Clear

    2 Pages