Catalogs >
Titan Enterprises >
OG1 Oval Gear Meter

OG1 Oval Gear Meter
2Pages

Catalog excerpts

TECHNICAL PRODUCT DATA SHEET OG1 1L/Min Oval Gear Meter This compact rugged oval gear flowmeter is designed to give high performance with a low cost of ownership. The meters cover flow ranges from 0.01 to 1.0 L/min on 30 cSt oil and 0.1 to 1.0 L/min on water like liquids. It can have totally nonmetallic wetted components, PEEK, ceramic and an elastomer which makes this the ideal choice for the metering of aggressive chemicals. For OEM use alternatives, including manifold mountings, are available. The standard models have 316 St St or PEEK bodies with Viton® ‘O’ ring seals. At the heart of the meter are a pair of toothed oval gears one of which contains chemically resistant magnets. Rotation is detected through the chamber wall by a Hall effect detector, Namur sensor or a reed switch giving approximately 2050 pulses per litre passed. The output is an NPN pulse or a voltage free contact closure either of which is readily interfaced with most electronic display or recording devices. This combination of materials and technology ensures a long life product with reliable, accurate operation throughout. IDEAL FOR • Engine test • Oil flow • High viscosity fluids • OEM equipment • Hazardous areas OG1 30cStk oil ‘K’ Factor vs Flow rate 2450 2400 Flow L/minute FEATURES • Excellent chemical resistance • Rugged construction • Individual calibration • High viscosity capability • Low pressure loss • No flow conditioning required • Compact meter assembly • Hall, reed switch or Namur sensor • Accuracy 1.0% FSD water 0.75% FSD oil (30 cSt) • ±0.5% reading * • 0.1% repeatability • IP67/NEMA 4 protection • Models to 700 Bar • Non-metallic option * When used with our metra-smart instrument

Open the catalog to page 1

OG1 1L/Min Oval Gear Meter Ilian TECHNICAL SPECIFICATIONS Ordering codes Model OG1 Body material S = 316 St St 50 bar std P = PEEK 10 Bar max H = Hastelloy C Temp rating S = 80°C / 158°F T = 100°C / 212°F U = 150°C / 300°F Pressure rating 5 = 50 Bar 750 PSI (St St) 1 = 10 Bar 150 PSI (Al / PEEK) 4 = 400 Bar 5880 PSI (St St) 7 = 700 Bar 10150 PSI (St St) Seal Material V = Viton® N = Nitrile E = EPDM P = PTFE (50 Bar max) K = Kalrez® Detector Type H = Hall effect R = Reed switch & Resistor N = Namur X = Reed switch (Hazardous area) Pipe Thread Q = 1/4” (OG1 std) Connections B = BSP F N = NPT...

Open the catalog to page 2

OG1 Oval Gear Meter 2Pages

Catalog excerpts

All Titan Enterprises catalogs and technical brochures

OG1 Oval Gear Meter
2Pages