TECHNICAL PRODUCT DATA SHEET These compact rugged acrylic-topped oval gear flowmeters are designed to give high performance with a low cost of ownership. The meters cover flow ranges from 0.01 to 100 L/min on 30 cSt oil and 0.1 to 100 L/min on water-like liquids. For OEMs, alternatives are available, including manifold mountings. The standard models have 316 St St, aluminium (except MC1 and MC2) or PEEK bodies with Viton™ ‘O’ ring seals. For general specifications for these flow meters, refer to the corresponding Oval Gear data sheet for the required model, i.e. MC1 - OG1; MC2 - OG2, etc. • Engine test • High viscosity liquids • Hazardous areas • Rugged construction • High visibility • Individual calibration • High viscosity options • No flow conditioning required • Compact meter assembly • Hall, reed switch 0.1% repeatability IP65 protection 10 bar pressure Non-metallic option 60°C maximum temperature 5 f

Metra-Clear Oval Gear Meter Ilian TECHNICAL SPECIFICATIONS Ordering Codes Model The order code is preceded by the flow meter model eg MC3* Body Material S = 316 St St *Cap - Acrylic A = Aluminium *Cap - Acrylic (excl. MC1/MC2) P = PEEK (at 80°C max) *Cap - Acrylic Temp Rating S = 60°C / 140°F Pressure Rating 1 = 10 bar 150 PSI Seal Material V = Viton™ N = Nitrile E = EPDM K = Kalrez® Detector Type H = Hall Effect R = Reed Switch & Resistor X = Reed Switch (hazardous area) Process Fitting Size Q = 1/4” (MC1 & 2) Proces Fitting Type B = BSP F B = NPTF * Refer to specific Oval Gear data sheets for...