Catalog excerpts
TECHNICAL PRODUCT DATA SHEET Insertion Turbine This innovative, robust insertion turbine combines proven technology with modern materials and design. The PVDF turbine rotates freely on a 316 St St shaft and has specially aerofoil shaped blades to extend the dynamic range of the meter. The specially contoured housing further improves the meters linearity particularly at lower fluid velocities. Each meter contains two sensors, one self powered for our battery operated equipment and the other an open collector transistor. A reed switch may be specified for hazardous areas where simple apparatus is acceptable. The body is manufactured from AISI316 stainless steel and as standard is supplied with 1.5M of five core screened instrument cable. The MetraCount, Metra-Smart and Metra-Batch devices can all be mounted directly onto the meter (via a mounting stalk) and all of these can be self powered with the exception of MetraBatch which requires an external power source. IDEAL FOR • HVAC • Water distribution • Boiler feed • Irrigation 260 Insertion depth = pipe internal diameter divided by 8. FEATURES • Economical • For 40–900mm pipes • 0.3 to 10M/S velocity • Linearity 1.5% typical • 316 St St body • Dual sensing • Low installation cost • Pulse output • 80 Bar rating • Viton® seal • 1½” fitting • 1% repeatability • IP68 (NEMA 6) • 100°C standard • IS option for hazardous areas • Bi-diect
Open the catalog to page 1Insertion Turbine Ilian Ordering codes — Standard meter BSPT mount 400-003 BSPT reed switch 400-003-R NPT mount 400-004 Mounting stalk 400-005 For local instrument mounting These insertion turbines provide a cost effective and simple means to measure the flow of a wide range of low viscosity liquids. Installation is quick and inexpensive in pipes from 40mm diameter up to 900mm diameter. For rate and total applications a self powered instrument can be mounted directly onto the meter for a standalone measurement. Other instruments permit high and low flow alarms, 4-20mA loops or even batching...
Open the catalog to page 2All Titan Enterprises catalogs and technical brochures
-
Analogue Converter
2 Pages
-
Turbine Flowmeters Overview
2 Pages
-
Metra-Clear Oval Gear Meter
2 Pages
-
OG7 500L/Min Oval Gear Meter
2 Pages
-
OG6 200L/Min Oval Gear Meter
2 Pages
-
OG5 100L/Min Oval Gear Meter
2 Pages
-
OG4 50L/Min Oval Gear Meter
2 Pages
-
OG3 10L/Min Oval Gear Meter
2 Pages
-
OG2 4L/Min Totaliser
2 Pages
-
OG1 1L/Min Oval Gear Meter
2 Pages
-
Oval Gear Meters Overview
2 Pages
-
Beverage Meter
1 Pages
-
Flow Rate Totaliser
1 Pages
-
FT2 Hall Effect Detection
2 Pages
-
FT2 Optical Detection
2 Pages
-
1000 Series Flowmeter
2 Pages
-
Atrato 8pp
8 Pages
-
Atrato
8 Pages
-
Process Atrato Ultrasonic
2 Pages
-
1000 Series Flowmeter
2 Pages
-
800 Series Flowmeter
2 Pages
-
OG5 Oval Gear Meter
2 Pages
-
Beverage Meter
1 Pages
-
Metra-Clear
2 Pages
-
OG2 Totaliser
2 Pages
-
Analogue Converter
2 Pages
-
OG1 Oval Gear Meter
2 Pages
-
OG2 Oval Gear Meter
2 Pages
-
OG3 Oval Gear Meter
2 Pages
-
OG4 Oval Gear Meter
2 Pages
-
OG6 Oval Gear Meter
2 Pages
-
OG7 Oval Gear Meter
2 Pages
-
900 Series Flowmeter
2 Pages