TECHNICAL PRODUCT DATA SHEET Ilian High Pressure Oval Gear Meters These compact rugged oval gear flowmeters are designed to give high performance with a low cost of ownership. These meters are capable of measuring simple water-like products as well as lubricating fluids. The standard inlet and outlet are BSP or NPT female threads for autoclave and flanges are available on special orders. For OEMs, alternatives are available, including manifold mountings. The standard models are 316 St St, and other materials are available if required. For hazardous areas either the Namur sensor or the reed switch (simple apparatus) may be used. • Excellent chemical resistance • Rugged construction • Individual calibration • High viscosity capability • No flow conditioning required • Compact meter assembly • Hall, reed switch or Namur sensor • Good accuracy • Up to 700 bar on selected models; up to 950 bar for special orders • Non-metallic option Standard Materials of Construction ‘O’ Ring seal - Viton™ Gears - PEEK Magnets - Ceramic Ceramic (PTFE encapsulated op

High Pressure Oval Gear MetersOrdering Codes Model At the heart of the meter are a pair of toothed oval gears one of which contains chemically resistant magnets. Rotation is detected through the chamber wall by a Hall Effect detector, Namur sensor or a reed switch giving a number pulses per litre passed. The output is an NPN pulse or a voltage free contact closure either of which is readily interfaced with most electronic display or recording devices. This combination of materials and technology ensures a long life product with reliable, accurate operation throughout. PEEK is a superb material...