TECHNICAL PRODUCT This multi-range radial flow turbine meter uses a low inertia turbine supported on robust sapphire bearings in a chemically resistant housing. Nine flow ranges (0.05 to 160 L/min), a choice of ‘plug in’ fittings and individual traceable calibration, make this meter one of the most flexible available. It uses Hall effect sensing so that opaque liquids may still be metered. For OEM applications the fittings can be tailored to suit the installation and speed production. Custom leads or connectors are also available for quantity orders. Opaque liquids Laboratory tests Cooling equipment Semiconductor plant Water treatment Low viscosity fluids Accuracy 1-2% FSD Sapphire bearings Hall effect sensing 9 flow ranges Pulse output 15 bar pressure rating IP65 protection All fittings except V” BSPF (Vi” BSPF: only 80mm) Viton™ seal as standard Choice of fittings 0.1% Repeatability

FT2 Hall Effect Detection The combination of materials and technology ensures a long life product with reliable operation throughout. Because the flowmeter is so versatile with respect to flow range and fittings every combination of range and fitting is not available. The chart below shows the maximum standard flow rate/fitting we would recommend to attain our performance figures. Alternatives are possible but there would be degradation in the meters performance. Ordering Codes Detector Type Electrical Connections Seal Material N = Nitrile E = EPDM K = Kalrez® Process Fitting Size / Type Model...