Catalogs >
Titan Enterprises >
FT2 Hall Effect Detection

FT2 Hall Effect Detection
2Pages

Catalog excerpts

TECHNICAL PRODUCT DATA SHEET FT2 Hall Effect Detection This multi-range radial flow turbine meter uses a low inertia turbine supported on robust sapphire bearings in a chemically resistant housing. Nine flow ranges (0.05 to 160 L/min), a choice of “plug in” fittings and individual traceable calibration make this meter one of the most flexible available. It uses Hall effect sensing so that opaque fluids may still be metered. For OEM applications the fittings can be tailored to suit the installation and speed production. Custom leads or connectors are also available for quantity orders. • Opaque fluids • Laboratory tests • Cooling equipment • Semiconductor plant • Water treatment • Low viscosity fluids FEATURES • Economical • PPS body • ± 0.75% reading * • 1-2% FSD • Sapphire bearings • Hall effect sensing • 9 Flow ranges • Pulse output • 15 Bar rating • IP65 • Viton® seal as standard • Choice of fittings • 0.1% Repeatability • 5 to 24Vdc • -15°C Min to 125°C * When used with our Metra-Smart instrument

Open the catalog to page 1

FT2 Hall Effect Detection Ilian Ordering codes The combination of materials and technology ensures a long Detector Type 22 = Hall effect Electrical connections 0 = Rubber grommet P = 4 pin socket N = IP67 gland Model 004 016 045 065 010 030 060 100 160 Seal Material V = Viton® N = Nitrile E = EPDM K = Kalrez Fitting Size 25 = V4”BSP 50 = 1/2”BSP 75 = 3/4”BSP 10=1”BSP 8H = 8mm hose 0H = 13mm hose Fitting Material B = Brass S = 316 St St C = PVC (60°C max) P = PVDF Special Code life product with reliable operation throughout. Because the flowmeter is so versatile with respect to flow range...

Open the catalog to page 2

FT2 Hall Effect Detection 2Pages

Catalog excerpts

All Titan Enterprises catalogs and technical brochures

FT2 Hall Effect Detection
2Pages