Catalogs >
Titan Enterprises >
Analogue Converter

Analogue Converter
2Pages

Catalog excerpts

TECHNICAL PRODUCT DATA SHEET Analogue Converter This simple wall, or in some cases, flowmeter mounted instrument gives an analogue output proportional to flow. Three basic models are available offering 0/4 to 20mA, 0 to 5 volt and 0 to 10 volt outputs. In all cases the offset and full scale adjustments are independent of each other. The standard converter has an input frequency range of 0.5 to 850Hz. This is selectable via DIL switches. A special lower range version is available for use with lower frequency inputs such as positive displacement flowmeters, this device operates down to 0.25Hz. At these very low frequencies the output can be “damped”. Two status LEDs indicate whether pulses are being received and if the output is operating within its selected flow range. The enclosure is a high impact polymer that seals the unit to IP65 (NEMA 4X). Access to the terminals is via a pair of glands on the bottom of the enclosure. IDEAL FOR • Data monitoring • Test rigs • Control systems Ordering codes Analogue Converter 4 - 20mA = 370-005 0 - 10V = 370-006 0 - 5V = 370-007 For operation down to 0.25Hz insert suffix V4 after the above part numbers e.g. 370-005V4. 98 2 x 4.1mm dia mounting holes (in underside) FEATURES • 0/4-20mA, 0-5V or 0-10V • IP65 (Nema 4X) • Non volatile memory • 15-24Vdc operation • Pulse input • Output damping • 0 – 50°C • Competitively priced • Wall mounting • 4 frequency ranges • Sensor PSU (5V) • Separate zero & span adjustments • Pulse

Open the catalog to page 1

Analogue Converter Span adjustment. This sets the full scale output. Zero or offset adjustment 0V for Voltage 4mA for 4-20mA Power Supply Pulse output The sensor can be reed switch, Hall Effect or optical. Output to 20mA 0/4 0 to 5Vdc 0 to 10Vdc Signal Pulse input compatible with reed switch, Hall effect or optical detectors Display Status LEDs Red for output errors Green for signal input. Enclosure IP66 (NEMA 4X) High impact glass polymer. Temp Frequency range Minimum Frequency 0.25/0.50Hz. Maximum Frequency 850Hz. Selectable in four ranges. Output damping for low frequencies Weight Flow...

Open the catalog to page 2

Analogue Converter 2Pages

Catalog excerpts

All Titan Enterprises catalogs and technical brochures

Analogue Converter
2Pages