Catalogs >
Titan Enterprises >
1000 Series Flowmeter

1000 Series Flowmeter
2Pages

Catalog excerpts

TECHNICAL PRODUCT DATA SHEET 1000 Series Flowmeter • Laboratory tests • Cooling equipment • Active flow alarms • Semiconductor plant • Engine test The 1000 series flowmeter is designed to give high performance and competitive pricing with 7 flow ranges from 0.05 to 30 L/min. Its choice of body materials makes this the ideal choice for the metering of aggressive chemicals, including ultra-pure water. The standard inlet is a ^“BSPF although for OEM use alternatives are available. The bearings are made of sapphire for long life and reliability, the body is either PVDF or 316 stainless steel and as standard the ‘O’ ring seal is Viton®. FEATURES • Low cost • PVDF or St St body • ±0.75% Reading* • 1- 2% FSD • Sapphire bearings • Hall Effect sensor • 7 Flow ranges • Pulse output (NPN Std) • Pulse output (PNP Option) • 10 Bar rating (40 Bar option) • Viton® seal as standard • 0.1% Repeatability • 4.5 to 24Vdc • -25°C Min to 125°C Max • IP67 * When used with a Metra-Smart instrument

Open the catalog to page 1

Ordering codes At the heart of the meter is a precision turbine that rotates freely on robust sapphire bearings and contains over-moulded magnets that are detected through the chamber wall by a Hall effect detector. The output is a stream of NPN pulses that readily interfaces with most electronic display or recording devices. This combination of materials and technology ensures a long life product with reliable operation throughout. There are two temperature options 125°C or 60°C. The 60°C unit is fitted with two LEDs to monitor the power and pulse output, both NPN and PNP transistor...

Open the catalog to page 2

1000 Series Flowmeter 2Pages

Catalog excerpts

All Titan Enterprises catalogs and technical brochures

1000 Series Flowmeter
2Pages