S 59322/AIT-440 (Example drawing) Dimensions in mm 1377,5 ø787 TECHNICAL PARAMETERS Vibration exciter S 59322/*-440 22000/17000/66000 N 5 - 3000 Hz > 2250 Hz 63.5/63.5/76.2 mm 2.0/2.0/3.5 m/s 80/55/200 g 150 N/mm 22 kg 300 kg 1750/2000 kg <1.5 mT 440 mm Min. 600 kPa Temperature, displacement, cooling air, overcurrent, compressed air 1) Random force according to ISO 5344:2004 2) Theoretical maximum shock value. Depends on payload, amplifier, shock and shock width 3) measured at 150 mm above armature inserts For long-term tests, the load must be reduced to 80 %. Continuous operation at maximum load can cause damage. * RIT or AIT (explanation see TIRA selection guide page 7) SCOPE OF DELIVERY, OPTIONS AND FEATURES OF THE SYSTEM 622 Scope of delivery: Vibration exciter 22 kN Trunnion mount (RIT or AIT) Power amplifier 22.5 kVA Cooling blower Connection cables (each 10 m) Power cables (each 10 m) for amplifier (CEE 63 connector) and blower (CEE 32 connector) Blower hose ø150 mm (5 m) Compressed-air hose NW 7,2 (Standard) (5 m) Options: AIT-trunnion frame (see illustration) with integrated vibration isolation RIT-trunnion frame GmbH © TIRA GmbH • Version 10 - 2022-03-10 Options: Different hole pattern of armature (different pitch diameter and/or thread inserts) at customers request Squeak&Rattle (Silent operation without blower) Wheels&Rails (incl. 3m rails) Airglide-option (Shaker movable on air cushions) Thermobarrier (-40°C to +140°C) Chamber leadthrough Climatic chamber support kit Remote control (Software) ASM-Mode (Auto Shutdown Manager) Silencer for cooling blower (Noise reduction 9 - 15 dB(A)) Acoustic enclosure for cooling blower (Noise reduction 5 - 23 dB(A)) Cable extension Factory acceptance test Energy Management System Operation with temperature-controlled cooling blower (and optional with variable field strength) Features: Vibration isolation < 3 Hz (AIT) < 6 Hz (RIT;LB) Coarse filter unit Fully automatic pneumatic load compensation AIT fixable Automatic centering of the AIT-System and the armature Degauss kit to reduce stray magnetic field Made in Germany Servicehotline Eisfelder Str. 23/25, 96528 Schalkau, Germany • Tel.: +49 36766 280-0 • Fax: +49 36766 280-99 • Internet: www.tira-gmbh.de • Email: [email protected] Subject to modifications TIRA Vibration Test Systems Rated peak force Sinepk/RandomRMS1/Shockpk2 Frequency range Main resonance frequency Max. displacement Peak-Peak Max. velocity Sine/Random/Shock Max. acceleration Sine/Random/Shock Suspension stiffness Effective moving mass Max. payload Total mass with trunnion RIT/AIT* Magn. stray field3 Armature diameter Required compressed air supply Interlocks Vibration Test Syste

TECHNICAL PARAMETERS Cooling blower TB 7/FUK/11 Output powerRMS Frequency range VoltageRMS, max. CurrentRMS, max. Signal input voltage Total Harmonic Distortion (at 70ARMS, 200 Hz) Signal to noise ratio Field voltage Field current Total mass Dimensions (WxHxD) Power supply (Standard) Recommended fuse protection (Standard) Max. power consumption at 400 V Interlocks: Max. volume flow rate Max. total pressure difference Motor output Max. frequency Hose diameter Hose length (Std.) Total mass Dimensions (WxHxD) Max. sound pressure level Switch box (fixation to wall): Mass Dimensions (WxHxD) Power...