TIRA Vibration Test Systems Selection Guide

System overview TIRA Vibration Test Systems – Vibration Testing Equipment System overview TIRA GmbH supplies measuring and testing systems for industry and research worldwide. At the Thuringia business location, we develop and manufacture modern plant engineering including application-specific software for testing the properties of materials and recording and eliminating undesirable vibrations. Our product- and delivery range: · Electrodynamic vibration test systems, 9N - 300 kN · Modal systems from 100 N - 15 kN · Long stroke systems from 4 kN - 15 kN, max. stroke 100 mm · Calibration shaker...

Vibration test systems from 9 N to 400 N Our products are subject to strict quality control in accordance with the requirements of CE and national and international standards. The same care is given to the maintenance and modernisation of our traditional TIRA test and measurement technology, which has been proven over many years. In close cooperation with our customers, we maintain the progress, efficiency and quality of TIRA products and invest in the future of this potential. Our quality management has been certified according to DIN ISO 9001 since 1995 and according to DIN EN ISO 9001:2015...

Vibration test systems from 1000 N to 2700 N TIRA Vibration Test Systems Vibration test systems from 1000 N to 2700 N · Automatic centering of the armature · LS-shakers with up to 45 mm displacement and electronic zero-point regulation with adjustable stiffness · Optional degauss kit to reduce stray magnetic field · Multiple safety devices · Coarse filter unit · Squeak&Rattle Option (Low noise operation without blower) TIRA Energy Management System The TIRA Energy Management System enables for all vibration test systems with a force of 2.7 kN to 70 kN two possible energy saving options: · operation...

Vibration test systems from 4 kN to 8 kN · Clamping table ø180 mm with 21 threaded inserts or ø340 mm with 25 threaded inserts · Long-time operation · Minimum maintenance effort · High cross-axial stiffness · Supported by rugged frame with combined rubber/air isolators · Automatic centering of the armature · Fully automatic pneumatic load compensation for heavy test loads · 50.8 mm (2 inch) displacement · Standard degauss kit to reduce stray magnetic field · Optional low degauss kit to reduce stray magnetic field to <0.8 mT · Multiple safety devices · Coarse filter unit · Squeak&Rattle Option...

Vibration test systems from 11 kN to 15 kN TIRA Vibration Test Systems Vibration test systems from 11 kN to 15 kN · Long-time operation · Minimum maintenance effort · High cross-axial stiffness · Supported by rugged frame with vibration isolators · Fully automatic pneumatic load compensation for heavy test loads · Coarse filter unit · 50.8 mm (2 inch) displacement · Standard degauss kit to reduce stray magnetic field · Optional low degauss kit to reduce stray magnetic field to <0.8 mT · Wheels&Rails Option (Shaker is maneuverable on rails) · Squeak&Rattle Option (Low noise operation without blower)...

Vibration test system 22 kN · Coarse filter unit · Available as RIT or AIT trunnion system* · 76.2 mm (3 inch) displacement (Shock) · Energy-saving mode (Field power reduction) · Standard degauss kit to reduce stray magnetic field · Wheels&Rails Option (Shaker is maneuverable on rails) · Airglide option (Shaker is maneuverable on air cushions) · Long-time operation · Minimum maintenance effort · High cross-axial stiffness · Supported by rugged frame with vibration isolators · Automatic centering of the AIT-System and the armature · Fully automatic pneumatic load compensation for heavy test loads...

Vibration test systems from 27 kN to 35 kN TIRA Vibration Test Systems Vibration test systems from 27 kN to 35 kN · Energy-saving mode (Field power reduction) · Optional Dual Bearing-System for enhancement of cross axial stiffness and reduction of wear · Airglide option (Shaker is maneuverable on air cushions) · Multiple safety devices · Clamping table ø340 mm, ø440 mm or ø640 mm · Long-time operation · Minimum maintenance effort · High cross-axial stiffness · Supported by rugged frame with vibration isolators · Automatic centering of the AIT-System and the armature · AIT-System fixable to use...

Vibration test systems from 49.5 kN to 70 kN · Clamping table ø480 mm · Other clamping table sizes on request · Long-time operation · Minimum maintenance effort · High cross-axial stiffness · Supported by rugged frame with vibration isolators · Automatic centering of the AIT-System and the armature · AIT-System fixable to use the full displacement also at low frequencies and heavy loads · Fully automatic pneumatic load compensation for heavy test loads · Air-cooling blower with optional fan speed control · Up to 76.2 mm (3") displacement · Degauss kit to reduce stray magnetic field · Energy-saving...

Water-cooled vibration test systems from 74 kN to 125 kN TIRA Vibration Test Systems Water-cooled vibration test systems from 74 kN to 125 kN Water-cooled TIRA shakers are guided hydrostatically and cooled by a closed water circuit. The external cooling unit also supplies the lubricant for the hydrostatic bearings, which enables frictionless positioning of the vibration armature. Water-cooled shakers have the advantage of generating high forces for testing heavy loads with high accelerations. Specimen masses up to 910 kg are possible. A fully automatic pneumatic load compensation system enables...