Wedge Style Tensile Grips from Tinius Olsen
2Pages

{{requestButtons}}

Catalog excerpts

Wedge Style Tensile Grips from Tinius Olsen - 1

GRIPSWedge Style Tensile Grips SELF-TIGHTENING, 10kN Description: Self-tightening wedge grips with spring-loaded wedges to provide the initial gripping and allow rapid loading of the sample. Gripping wedges are supplied with serrated jaw faces for gripping flat samples. Optional V profile wedges are available for gripping round sections. Compatible with: ST Series materials testing machines. Applications: Recommended for gripping relatively soft materials in parallel or dumbbell form. Typical materials include copper, semi-rigid plastics, film, board, wood etc. Ideally the overall sample length should be greater than 150mm (6in). Specifications • Maximum capacity: 10kN/2000lbf • Minimum load cell: 250N/50lbf • Gripping length: 50mm/2in • Maximum sample width: 25mm/1in • Maximum sample thickness: 8mm/0.3in • Length each: 120mm/5in • Weight each: 1.8kg/4lbf • Temperature limits: -30-70°C V profile jaw face diameters • HW10R8 4-8mm/0.15-0.31mm • HW10R10 6-10mm/0.23-0.4mm • HW10R15 10-15mm/0.4-0.6mm Tinius Olsen Specifications • Maximum capacity: 25kN/5,000lbf • Minimum load cell: 500N/100lbf • Gripping length: 50mm/2in • Maximum sample width: 30mm/1.2in • Maximum sample thickness: 15mm/0.6in • Length each: 210mm/8.3in • Weight each: 6.3kg/14lbf • Temperature limits: -40-100°C V profile jaw face diameters • HW20R5 3-5mm/0.12-0.2mm • HW20R8 4-8mm/0.15-0.31mm • HW20R10 5-10mm/0.2-0.4mm • HW20R15 8-15mm/0.31-0.6mm SELF-TIGHTENING, 25kN Description: Self-tightening wedge grips. Wedges remain stationary when applying initial gripping force on the sample via the handwheel, so avoiding excessive compression of the sample prior to test. Grips are supplied with cross-hatched jaw faces for gripping flat samples. Optional V profile wedges are available for gripping round sections. Compatible with: ST Series materials testing machines. Applications: Suitable for gripping high strength rigid material in parallel or dumbbell form. Ideally the overall sample length should be greater than 150mm (6in). SELF-TIGHTENING, 50kN Description: Self-tightening wedge grips. Wedges remain stationary when applying initial gripping force on the sample via the handwheel, so avoiding excessive compression of the sample prior to test. Grips are supplied with cross-hatched jaw faces for gripping flat samples. Optional V profile wedges are available for gripping round sections. Compatible with: ST Series materials testing machines. Applications: Suitable for gripping high strength rigid material in parallel or dumbbell form. Ideally the overall sample length should be greater than 150mm (6in). Specifications • Maximum capacity: 50kN/10,000lbf • Minimum load cell: 500N/100lbf • Gripping length: 50mm/2in • Maximum sample width: 30mm/1.2in • Maximum sample thickness: 15mm/0.6in • Length each: 210mm/8.3in • Weight each: 6.3kg/14lbf • Temperature limits: -40-100°C V profile jaw face diameters • HW20R5 3-5mm/0.12-0.2mm • HW20R8 4-8mm/0.15-0.31mm • HW20R10 5-10mm/0.2-0.4mm • HW

Open the catalog to page 1
Wedge Style Tensile Grips from Tinius Olsen - 2

GRIPS Wedge Style Tensile Grips SELF-TIGHTENING, 100kN Description: Self-tightening wedge grips. Wedges remain stationary when applying initial gripping force on the sample via the capstan, so avoiding excessive compression of the sample prior to test. Grips are supplied with crosshatched jaw faces for gripping flat samples. Optional V profile wedges are available for gripping round sections. Compatible with: ST Series materials testing machines. Tinius Olsen Applications: Suitable for gripping high strength rigid material in parallel or dumbbell form. Ideally the overall sample length...

Open the catalog to page 2

All Tinius Olsen catalogs and technical brochures

  1. ST Series

    8 Pages

  2. HDTM Series

    5 Pages