Website:
Tinius Olsen
Catalog excerpts
GRIPSPneumatic Tensile Grips Tinius Olsen HEAVY DUTY VISE GRIP Description: Heavy duty vise grip. It is supplied with three sets of interchangeable jaw faces: crosshatch, flat alloy and corrugated. The depth of corrugation is graduated to reduce the amount of gripping stress at the front edge of the jaw face. Additional jaw faces are available including rubber faced or grab test jaws. Compatible with: ST Series materials testing machines. Applications: Flexible sheet materials, woven or non-woven textiles, plastic film and cork. Ideally the sample should be longer than 175mm (7in). Specifications • Maximum capacity: 20kN/4,000lbf • Minimum load cell: 500N/100lbf • Maximum sample width: 100mm/4in • Maximum sample thickness: 10mm/0.4in • Gripping length: 50mm/2in • Length each: 150mm/6in • Weight each: 2.8kg/6lb • Temperature limits: -70-200°C For grab test, specify back fixed jaw as either 50 or 75mm wide and the front moving jaw 25 x 25mm. Specifications • Maximum capacity: 500N/100lbf • Minimum load cell: 50N/10lbf • Maximum sample width: 25mm/1in • Maximum sample thickness: 5mm/0.2in • Gripping length: 25mm/1in • Length each: 105mm/4in • Weight each:700g/1.5lb • Temperature limits: 0-40°C • Operating air supply: 80-100psi/5.5-7bar LIGHT DUTY PNEUMATIC GRIP Description: Light duty pneumatic grip, supplied with dual action foot switch to leave both hands free. Compatible with: ST Series materials testing machines. Applications: Paper, plastic film, woven and non-woven textiles. HEAVY DUTY PNEUMATIC GRIP Description: Heavy duty pneumatic grip operated by an integral valve. 25 x 50mm (1 x 2in) rubber faced jaws are supplied as standard. Additional jaws are available. Compatible with: ST Series materials testing machines. Applications: Flat flexible materials, textiles, paper, film and polymers. www.tiniusolsen.com Specifications • Maximum capacity: 5kN/1,000lbf • Minimum load cell: 500N/100lbf • Maximum sample width: 75mm/3in • Maximum sample thickness: 10mm/0.4in • Length each: 160mm/6.3in • Weight each:1.7kg /3.75lb • Temperature limits: Ambient • Operating air supply: 80-100psi/5.5-7b
Open the catalog to page 1
GRIPSPneumatic Tensile Grips Tinius Olsen PNEUMATIC GRIP Description: Pneumatic grip supplied with dual action foot switch. 25 x 10mm (1 x 0.4in) rubber faced jaws are supplied as standard. Serrated jaws are available. Compatible with: ST Series materials testing machines. Applications: Flexible sheet materials, paper, film and polymers. Specifications • Maximum capacity: 1kN/200lbf • Minimum load cell: 100N/20lbf • Maximum sample width: 25mm/1in • Maximum sample thickness: 3mm/0.12in • Gripping length 10mm/0.4in • Length each: 105mm/4in • Weight each: 700g/1.5lb • Temperature...
Open the catalog to page 2All Tinius Olsen catalogs and technical brochures
-
Indentation Hardness Testers16 Pages
-
ST Series8 Pages
-
Model MP1200 Melt Indexers8 Pages
-
MODEL HMC 2.02 Pages
-
HDTM Series5 Pages
