Model MP1200 Melt Indexers
8Pages

{{requestButtons}}

Catalog excerpts

Model MP1200 Melt Indexers - 1

Melt Indexers Tinius Olsen

Open the catalog to page 1
Model MP1200 Melt Indexers - 2

Tinius Olsen is proud to introduce the latest addition to its polymer testing line, the MP1200 Melt Flow Tester/Extrusion Plastometer. The MP1200 features the latest in melt flow measurement technology and allows operators to quickly and easily set up and perform melt flow tests, according to ASTM D1238, ISO 1133-1 & 2, and other international and industrial specifications. The MP1200 is available in two versions: a manual version (Model MP1200), and a motorised version (Model MP1200M). The manual MP1200 comes with everything you need (except weights and laboratory balance) to perform an...

Open the catalog to page 2
Model MP1200 Melt Indexers - 3

Key features ● hree-zone band heater. T ● Touch-screen control. ● Quick die release. ● owerful data analysis and control P software. ● USB connectivity. ● apered weight design. T Home screen for manual MP1200 Home screen for MP1200M motorised Model MP1200M (motorised) shown with Programmable Piston Displacement Transducer and Automatic Cutter. Program creation screen for automatic time flow and time basis tests. Test result screen.

Open the catalog to page 3
Model MP1200 Melt Indexers - 4

Melt Flow Indexers MP1200 OPTIONAL ACCESSORIES Flow rate ratio Adding this flow rate ratio attachment allows you to determine flow rate using two or three different test loads on one charge of material. Cut off tools Two types of cut off tool are available – a manual cut off or a motorised cut off. The manual cut off (above left) features a crank that the operator rotates when prompted; the motorised cut off (above right) will automatically cut the extrudate at user preset intervals. Pneumatic clean and purge Available as a purge-only accessory or a purge-and-cleaning accessory, these...

Open the catalog to page 4
Model MP1200 Melt Indexers - 5

Weight cylinder holder rotates away from the test area to enable removal of the piston and cleaning. MP1200 with selectable weight system provides a time saving and safe way to configure a melt flow test. Weights are held and selected from weight cylinder holder and are automatically delivered onto the piston in a controlled way. This means no lifting of masses by the user and is guaranteed to increase throughput. The required weight is selected by simply pulling the "Plate spade” from the weight cylinder holder and pressing it into the desired slot thus selecting the required weight.

Open the catalog to page 5
Model MP1200 Melt Indexers - 6

Specifications subject to change without notice. MP1200 melt flow tester with assisted weight lift option, available as a standard option for all Tinius Olsen MP1200 models or as a field fitted solution for existing motorized Tinius MP1200 units Weight configurations based on polymer and testing standard requirement are selected and applied in a safe way requiring no user handling.

Open the catalog to page 6
Model MP1200 Melt Indexers - 8

Melt Indexers www.tiniusolsen.com info@tiniusolsen.com • Horsham, PA, USA • Redhill, Surrey, UK • Noida, UP, India • Shanghai, PR China Tinius Olsen

Open the catalog to page 8

All Tinius Olsen catalogs and technical brochures

  1. ST Series

    8 Pages

  2. HDTM Series

    5 Pages