Website:
Tinius Olsen
Catalog excerpts
GRIPSLow Force Tensile Grips TENSION HOOKS, 2.5kN Description: Tension hooks for use in component testing, often used individually in conjunction with other gripping devices. Variations of the hook profile are available to suit the component under test as well as a self-aligning option. Compatible with: ST Series materials testing machines. Applications: Tension springs, zip components, canned drink ring pulls and medical components. Specifications • Maximum capacity: 2.5kN/500lbf • Minimum load cell: 50N/10lbf • Length each: 82mm/3.2in • Weight each: 300g/0.66lb • Temperature limits: -30-70°C Note: Hook profile and required dimensions must be considered and included on order. Tinius Olsen Specifications • Maximum capacity: 10kN/2,000lbf • Minimum load cell: 50N/1,000lbf • Gripping length: See Note, right • Maximum specimen width: See Note, right • Maximum specimen thickness: 16mm/0.63in • Length each: 110mm/4.3in • Weight each: 800g/1.7lb • Temperature limits: -30-70°C DUMBBELL GRIP, 10kN Description: Dumbbell grip for holding thick rigid dumbbells. The curved shoulder of the dumbbell is located between two bollards. With no clamping necessary, specimens can be loaded very quickly. Compatible with: ST Series materials testing machines. Applications: Rigid polymer dumbbells typically cut from a section of gas and water pipe. Note: Dumbbell conforms to ASTM D638 type iv, BS2782 Part 3 Method 320A Fig 1., and DIN53455 No 4 Fig 3. CEMENT BRIQUETTE CHUCKS, 10kN Description: Cement briquette chucks. A non-clamping chuck with an internal profile conforming to the British Standard for the cast cement test. Compatible with: ST Series materials testing machines. Applications: Cast cement and resin bonded sand briquettes. Note: Specimen conforms to BS6319 Part B. Specifications • Maximum capacity: 10kN/2,000lbf • Minimum load cell: 100N/20lbf • Maximum specimen width and thickness: See Note, left • Length each: 90mm/3.5in • Weight each: 1kg/2.2lb • Temperature limits: -30-70°C
Open the catalog to page 1
GRIPSLow Force Tensile Grips Tinius Olsen SPLIT COLLECT CHUCKS, 20kN Description: Hardened split collet chucks for holding turned dumbbell test pieces. Precise shoulder radius to prevent premature test piece breaking within the grip. Internal profile options must be considered and ordered to accommodate specific test specimen dimensions. Compatible with: ST Series materials testing machines. Applications: Metals, round and turned test specimens, particularly used where a limited amount of material is available to produce the test specimen, for example, from an alloy automobile wheel. Also...
Open the catalog to page 2All Tinius Olsen catalogs and technical brochures
-
Indentation Hardness Testers16 Pages
-
ST Series8 Pages
-
Model MP1200 Melt Indexers8 Pages
-
MODEL HMC 2.02 Pages
-
HDTM Series5 Pages
