GRIPS - Lightweight Flexural Jigs from Tinius Olsen
2Pages

{{requestButtons}}

Catalog excerpts

GRIPS - Lightweight Flexural Jigs from Tinius Olsen - 1

Lightweight Flexural Jigs FIXED SPAN TEST ATTACHMENT, 5kN Tinius Olsen Description: Fixed span three-point flexural test attachment comprises a base unit with two support contact points and one upper point of contact. Compatible with: Benchtop materials testing machines. Applications: Sintered materials, ceramics, glass etc. Specifications • Maximum capacity: 5kN/1,000lbf • Minimum load cell: 500N/100lbf • Fixed span: 254mm/10in • Radius of contact points: 16mm/0.63in • Maximum specimen width: 76mm/3in • Weight of upper contact: 0.7kg/1.54lb • Temperature limits: Ambient 10, 20, 40mm/ 0.4, 0.8, 1.58in • Maximum specimen width: 8mm/0.2in • Weight of upper contact: 0.35kg/0.75lb • Temperature limits:* Ambient *High and low temperature options available for use in temperature chambers SHORT SPAN, FIXED SPAN TEST ATTACHMENT, 5kN Description: Short span four-point, fixed span flexural test attachment comprising base and upper units, each with two points of contact. Upper unit is semi-articulating and all points of contact are free to rotate to minimise frictional constraints. Compatible with: Benchtop materials testing machines. Applications: Ceramics at ambient temperatures. WIDE VARIABLE SPAN TEST ATTACHMENT, 25kN Description: Wide variable span three-point flexural test attachment comprising a base unit with two points of contact, and an upper unit that provides a single, third point of contact. The lower points of contact are raised to accommodate highly flexible material to be tested, or allow the use of a displacement transducer. Graduated scale on the main body allows for accurate setting of the support span. Compatible with: Two-column benchtop materials testing machines Applications: Wood, particle board and plywood. Options: • Spans available in either Metric or English graduations. • Optional displacement transducer with 5pm resolution, 100pm accuracy and 100mm travel. Specifications • Maximum capacity: 25kN/5,000lbf • Minimum load cell: 250N/50lbf • Variable span: 50-1000mm /2-40in • Radius of contact anvils: 12.5mm/0.5in • Maximum specimen width: 110mm/4.3in • Weight of upper contact: 1.8kg/4lb • Temperature limits: Ambient

Open the catalog to page 1
GRIPS - Lightweight Flexural Jigs from Tinius Olsen - 2

Lightweight Flexural Jigs Tinius Olsen Specifications • Maximum capacity: 25kN/5,620lbf • Minimum load cell: 250N/56lbf • Variable span: 35-300mm/1.4-11.8in • Radius of contact points: *See Table 1.0 (right) • Maximum specimen width: 50mm/2in • Weight of upper contact: 1.5kg/3.3lb • Weight (except upper contact): 9.75kg /21.5lb • Temperature limits: -30-70°C Options: • Two-point centre anvil for conversion from three-point loading to four-point loading. • Spans available in either metric or English graduations. VARIABLE SPAN TEST ATTACHMENT, 25kN Description: Variable span three-point...

Open the catalog to page 2

All Tinius Olsen catalogs and technical brochures

  1. ST Series

    8 Pages

  2. HDTM Series

    5 Pages