TL8
5Pages

Catalog excerpts

Product Segments • Care Motion TiMOTION’s TL8 series columns are designed with a 3 stage cylindrical appearance and built-in motors. It was designed primarily for use in medical applications. The TL8 provides stable vertical lifting. This makes the engineering design process easier and safer by replacing older style lifting mechanisms that use many moving stages and have pinch points. The TL8 is suitable for the medical bed applications. General Features Max. load Max. dynamic bending moment 500Nm Max. static bending moment Retracted length Dimension of outer tube Matte silver, black Operational temperature range The TL8 can only be used in pairs; single column usage is not recommended. The TL8 is recommended for push applications only; pull conditions are not ad

Open the catalog to page 1

Retracted Length Load and Speed Load (N) Self Locking Typical Current (A) Force (N) No Load With Load 32V DC 24V DC Note 1 Parameters above are from tested average, please refer to approval drawing for final value. 2 The current & speed are tested with 24VDC motor.

Open the catalog to page 2

Motor Speed (5200RPM) Speed vs. Load 35.0 Performance Data (24V DC Motor)

Open the catalog to page 3

Minimum retract length needs to ≥ (stroke/2) +150 Special Functions for Spindle SubAssembly Functions for Limit Switches See page 5 1 = Two switches at full retracted / extended positions to cut current 3 = Two switches at full retracted / extended positions to send signal Output Signals Note 1 The TL8 is designed especially for push applications, not suitable for pull applications.

Open the catalog to page 4

TL8 Ordering Key Appendix Functions for Limit Switches Wire Definitions CODE extend (VDC+) retract (VDC+) extend (VDC+) upper limit switch retract (VDC+) lower limit switch Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice.

Open the catalog to page 5