series Product Segments • Care Motion • Industrial Motion The TL51 column from TiMOTION is designed for any height-adjustable medical application, such as exam chairs, treatment/procedure tables, and applications in healthcare or industrial environments requiring the use of a high load lifting column. The TL51 provides multiple cable exit options, such as from top end socket or top/bottom sides. With its 3-stage telescopic design, the TL51 lifting column offers a high degree of stability. General Features Self-locking force Max. dynamic bending moment Max. static bending moment Max. speed at max. load Max. speed at no load Retracted length Outer profile Output signals Operational temperature range 6,000N (push) IPX4 (cable exit: top end socket) IPX6 (cable exit: bottom sides) Matte silver, black

Self Locking Force(N) Load and Speed CODE Push (N) No Load With Load No Load With Load 1 Parameters above are from tested average, please refer to approval drawing for final value. 2 The current & speed in table are tested with 24V DC motor. 3 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. 4 Bending moment Y direction = X*1 5 Static bending moment = dynamic*2 Dynamic bending moment (Nm)- X direction Stroke (mm) S/2+180 S/2+240

Motor Speed (5100RPM, Duty cycle 10%) Speed vs. Load 30.0 Performance Data (24V DC Motor)

Cable Exit Special Functions for Spindle SubAssembly Functions for Limit Switches See page 8 1 = Two switches at full retracted / extended positions to cut current 3 = Two switches at full retracted / extended positions to send signal Output Signals Tubes Direction See page 8 Grounding Function 2 = DIN 6P, socket, with Anti-pull buckle 2 = Matte silver

Voltage 5 = 24V DC, Thermal switch Load and Speed See page 2 Retracted Length (mm) See page 6 Cable Exit See page 7 Special Functions for Spindle SubAssembly 1 = Two switches at full retracted / extended positions to cut current 3 = Two switches at full retracted / extended positions to send signal Output Signals 0 = Without 2 = Hall sensor * 2 3 = POT Cable Length (mm) Color 1 = Straight, 500 3 = Straight, 1000 5 = Straight, 1500 7 = Straight, 2000 2 = Straight, 750 4 = Straight, 1250 6 = Straight, 1750 1 = Black 2 = Matte silver Tubes Direction See page 8

TL51 Ordering Key Appendix Retracted Length (mm) 1. Retracted length needs to > A+B+C 1 Different retracted length is relative to different bending moment, See page 2 Top End Socket Thinner on Top, Wider on Top, Wider on Top, Thinner on Top, Bottom Side Cable Top Side Cable Bottom Side Cable Top Side Cable C. When with POT (When without POT, C = 0) Top End Socket Thinner on Top, Wider on Top, Wider on Top, Thinner on Top, Bottom Side Cable Top Side Cable Bottom Side Cable Top Side Cable

TL51 Ordering Key Appendix Cable Exit 1 = Top end socket 2 = Thinner on top, bottom side cable 3 = Wider on top, top side cable 4 = Wider on top, bottom side cable 5 = Thinner on top, top side cable

TL51 Ordering Key AppendixFunctions for Limit Switches Wire Definitions CODE Pin • 1 (Green) 2 (Red) O 3 (White) 4 (Black) 5 (Yellow) A (Blue) 1 extend (VDC+) N/A N/A N/A retract (VDC+) N/A 3 extend (VDC+) common upper limit switch N/A retract (VDC+) lower limit switch 1 = DIN 6P, 90° plug 2 = Tinned leads 2 = DIN 6P, socket, with Anti-pull buckle H = Molex 8P 180° Q = Molex 6P, 90° plug (40511-123) Tubes Direction 0 = Thinner on top Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without...