TL3
12Pages

Product Segments • Care Motion • Comfort Motion • Ergo Motion • Industrial Motion The TL3 columns from TiMOTION are made up of three extruded aluminum tubes of rectangular shape that give the system great stability and a high stroke with reduced retracted length. This electric lifting column allows for an easy integration into many height adjustable workstation applications, such as an exam chair in healthcare industry. General Features Max. load & self - locking force Max. dynamic bending moment Max. static bending moment Retracted length Dimension of outer tube POT, Hall sensors, direct cut system Operational temperature range

Standard Dimensions Retracted Length

Load and Speed CODE Self Locking Force (N) Motor Speed (2200RPM, duty cycle 10%) B Motor Speed (2800RPM, duty cycle 10%) E Motor Speed (3800RPM, duty cycle 10%) G Note 1  Parameters above are from tested average, please refer to approval drawing for final value. 2 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. 3   he current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the current T measured in 24V DC; speed will...

Motor Speed (2200RPM, Duty cycle 10%) Speed vs. Load Performance Data (24V DC Motor)

Motor Speed (2800RPM, Duty cycle 10%) Speed vs. Load Performance Data (24V DC Motor)

Motor Speed (3800RPM, Duty cycle 10%) Speed vs. Load Performance Data (24V DC Motor)

Cable Exit See page 10 Special Functions for Spindle Sub-assembly Functions for Limit Switches See page 11 1 = Two switches at full retracted / extended positions to cut current 3 = Two switches at full retracted / extended positions to send signal Output Signals 0 = Without (The corresponding extension cable TEC needs to be ordered seperately*) Note: please contact TiMOTION before making an order Tubes Direction See page 12 Grounding Function Note 1  The TL3 is designed especially for push applications, not suitable for pull applications.

TL3 Ordering Key - Side Cable TL3 Cable Exit See page 10 2 = ottom side cable B Special Functions for Spindle Sub-assembly Functions for Limit Switches See page 11 1 = Two switches at full retracted / extended positions to cut current 3 = Two switches at full retracted / extended positions to send signal Output Signals 1 = DIN 6P, 90° plug 2 = Tinned leads 1 = Black (Black cable set) 2 = Silver (428C color cable set) 3 = Silver (Black cable set) Tubes Direction See page 12 Note: f "top+bottom cable" in Cable Exit section is I selected , could only select #0 Grounding Function 4 = Top (to...

Cable Exit See page 10 B = Top side - for TH; Bottom side - for TP C = Bottom side - Y cable, for TH + TP D = Top side - for the 2nd column; Bottom side - for TH & TP; direct cut operation with 2 columns E = Top side - for the 2nd column & TH; Bottom side - for TP; direct cut operation with 2 columns Special Functions for Spindle Sub-assembly Functions for Limit Switches See page 11 1 = Two switches at full retracted / extended positions to cut current Output Signals C = Direct cut, water proof, anti-pull Cable Length (mm) See page 12 B = Cable exit #B, L2 = L3 = 100 C = Cable exit #C, L1 =...

TL3 Ordering Key Appendix Retracted Length (mm) 1. Retracted length needs to ≥ A+B+C A. Load (N) Note 1  The minimum retracted length generated by the formula - Stroke / 2+150 applies to the minimum bending moment rating. Please refer to the left column of the “Dynamic bending moment chart “ on page 3. B. Cable Exit CODE Bottom Side Cable Top + Bottom side cable C. When with POT (When without POT, C = 0) Cable Exit Code Top End Socket Bottom Side Cable Top Side Cable Cable Exit 1 = op end socket T 2 = ottom side cable B 4 = op(to TC)+Bottom(to TH) side T cabl

TL3 Ordering Key Appendix Cable Exit B = Top side - for TH; Bottom side for TP C = Bottom side - Y cable, for TH + TP D = op side - for the 2nd column; T Bottom side - for TH & TP; direct cut operation with 2 columns E = op side - for the 2nd column & T TH; Bottom side - for TP; direct cut operation with 2 columns Functions for Limit Switches Wire Definitions CODE extend (VDC+) retract (VDC+) extend (VDC+) upper limit switch retract (VDC+) lower limit switch Connector 1 = DIN 6P, socket (Top end socket) 1 = DIN 6P, 90° plug (Side cable) C = Direct cut, water proof, anti-pull For TH: long...

TL3 Ordering Key Appendix Cable Length (mm) B = Cable exit #B, L2 = L3 = 100 L2 Tubes Direction 0 = Thinner on top Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice.