Product Segments • Care Motion • Comfort Motion • Ergo Motion • Industrial Motion TiMOTION’s TL18AC electric lifting column is designed for industrial and medical applications such as height adjustable workstations, screen and lifting tables. The TL18AC features an extruded aluminum rectangular appearance. It is equipped with AC plug to connect the computers, TV or other device directly. General Features Max. load & self – locking force Max. dynamic bending moment Max. static bending moment Retracted length Dimension of outer tube AC cable exit from top end, top side; Ethernet socket Operational temperature range

Standard Dimensions Retracted Length Load and Speed Push (N) Self Locking Typical Current (A) Force (N) No Load With Load 32V DC 24V DC Note 1  Parameters above are from tested average, please refer to approval drawing for final value. 2  With a 12V motor, the current is approximately twice the current measured in 24V; speed will be similar for both voltages. 3  Direction of bending moment: Direction

Motor Speed (3800RPM) Speed vs. Load 50.0 Performance Data (24V DC Motor) Note 1  The performance data in the curve charts shows theoretical value.

Special Functions for Spindle SubAssembly Tubes & Sockets Position Bottom Plate AC Input Plug & Output Socket K = 1 motor direct cut system Internet Socket 1 = With L = 1+1 motor direct cut system 1 = With Note 1  The TL18AC is designed especially for push applications, not suitable for pull applications.

TL18AC Ordering Key Appendix Retracted Length (mm) 1. Calculate A+B = Y 2. Retracted length needs to ≥ Stroke + Y A. Top Plate Bottom Plate B. AC Output & Socket Position C. Retracted Length : Minium Length Requirements Tubes & sockets position B,C Top&Buttom Plate with, without Top small Bottom small Top big Bottom small or Top small Bottom big

TL18AC Ordering Key Appendix Tube & Socket Position B = ube: Thinner on top T Sockets: Top end D = ube: Thinner on top T Sockets: Top side E = ube: Thicker on top T Sockets: Top side Direct Cut K = 1Motor direct cut. Control socket Without motor socket. Top end or top side - AC output & control socket L = 1+1 motor direct cut. Control socket - With motor socket. Top end or top side - AC output & control socket Ethernet Socket 0 = Without Ethernet socket Top end or top side- AC output & control socket 1 = ith Ethernet socket W Top end or top side- AC output & control socket Bottom side - AC input...

TL18AC Ordering Key Appendix Top Plate Tubes & socket position E Tubes & socket position D Tubes & socket position C Tubes & socket position B Bottom Plate 1 = Small plate Tubes & socket position E Tubes & socket position D Tubes & socket position C Tubes & socket position B Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice.