TL10
5Pages

Catalog excerpts

Product Segments • Ergo Motion TiMOTION’s TL10 series lifting columns are specifically designed for use in ergonomic desks and work tables. Using multiple TL series lifting columns with compatible TC series Control Boxes and TH/TDH series controls, work surfaces can be controlled quietly and smoothly with synchronous movement. All Ergo Motion TC series control boxes have a less than 0.1W standby power option that reduces power consumption. Our wide range of columns offer customers the solutions they require to satisfy their working environment project requirements. The TL10 has a three part telescopic outer tube that is designed for a narrow-top, wide-bottom rectangular appearance. General Features Maximum load Maximum speed at full load 33mm/s (with 800N in a push condition) Minimum installation dimension Dimension of outer tube (L*W) Black, white, grey, or special colors Three part outer tube with rectangular appearance With narrow top and wide bottom configuration

Open the catalog to page 1

Stroke + Retracted Length Retracted Length Load and Speed CODE Self Locking Force (N) Note 1 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. 2 The numbers above are based on the tested average, please refer to the approval drawing for the final value.

Open the catalog to page 2

Motor Speed (5200RPM) Speed vs. Load 65 Performance Data (24V DC Motor) Note 1 The performance data in the curve charts shows theoretical value.

Open the catalog to page 3

Appearance of Tubes See page 5 B = With wiper fixing holes at sides Stroke & Retracted Length (mm) 1 = Black, RAL 9005, Black wiper 2 = Grey, RAL 9006, Black wiper 3 = White, RAL 9016, Black wiper 4 = Special grey, RAL 9022, Black wiper 6 = Grey, RAL 9006, Grey wiper Motor Housing Step Output Signals 0 = Without L = Left, standard R = Right, standard 5 = Left, triangle C = Without wiper fixing holes at sides 7 = White, RAL 9016, White wiper 8 = Special grey, RAL 9022, Grey wiper B = Matte black, RAL 7021, Black wiper C = Graphite grey, RAL7024, Black wiper D = Matte black, RAL 7021, Matte...

Open the catalog to page 4

TL10 Ordering Key Appendix Appearance of Tubes B = With wiper fixing holes at sides C = Without wiper fixing holes at sides Stroke & Retracted Length (mm) Foot Assembly Standard Foot Assembly Stroke & Retracted Length S With Shoes Note 1 Only specific TEK could be with the shoes, please refer to TEK speccode Retracted length Retracted length With shoes Bracket Standard direction Triangle direction Right Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice.

Open the catalog to page 5