TGM7
5Pages

Catalog excerpts

Product Segments • Ergo Motion • Industrial Motion The TGM7 series is TiMOTION’s compact size gear motor. It was designed primarily for ergonomic applications like height adjustable workstations and tables, but can be used in many other applications. This economical product allows for fast, smooth and quiet adjustment of built-in spindles through the use of external limit switches. Shafting allows for the mechanical synchronization of dual spindles. General Features Voltage of motor Maximum speed at full load 156RPM (±5%) after gear reduction Maximum rated torque Operational temperature range at full performance Options Hall sensors

Open the catalog to page 1

Load and Speed CODE Self Locking Force (Nm) Hall Sensor Output With Load No Load 24V DC 32V DC With Load Magnet 24V DC Poles Note 1 Please refer to the approved drawing for the final authentic value. 2 The current & speed in table and diagram are tested with TiMOTION control boxes, and there will be around 10% tolerance depending on different models of the control box. (Under no load condition, the voltage is around 32V DC. At rated load, the voltage output will be around 24V

Open the catalog to page 2

Motor Speed (5200RPM) Speed vs. Torque Load 400 Current vs. Torque Load 10.0 Performance Data (24V DC Motor)

Open the catalog to page 3

Output Signal

Open the catalog to page 4

TGM7 Ordering Key Appendix Plug 0 = Tinned leads Input Torque Note 1 he combinations of TGM and TBS are marked as "v" on the above table. T 2 hen choosing the combination of TBS2 / 3 and TGM7, the hexagonal drive shaft is not required. W 3 hen choosing the combination of TBS1 / 4 / 5 / 9 / 10 and TGM1 / 3 / 4, the extra order of hexagonal drive shaft is needed. W 4 lease refer to the table below for the serial numbers and the dimensions of the component. P Hexagonal drive shaft Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific...

Open the catalog to page 5