TGM5
5Pages

Catalog excerpts

Product Segments • Care Motion TiMOTION’s TGM5 series gear motor was designed primarily for medical applications, but can be used in a wide range of other applications that require a water resistant motion product. This economical, high torque product allows for fast, smooth and quiet adjustment of built-in spindles through the use of external limit switches. Shafting allows for the mechanical synchronization of dual spindles. General Features Max. rated torque Hall sensors, motor brake Operational temperature range at full performance Hexagon hole for the shaft by 12mm diameter Low n

Open the catalog to page 1

Load and Speed CODE Self locking force (Nm) With Load No Load 24V DC 32V DC Hall Sensor Output With Load Magnet 24V DC Poles Note 1 Please refer to the approved drawing for the final authentic value. 2 he current & speed in table and diagram are tested with TiMOTION control boxes, and there will be around 10% tolerance T depending on different models of the control box. (Under no load condition, the voltage is around 32V DC. At rated load, the voltage output will be around 24V

Open the catalog to page 2

Motor Speed (3800RPM) Speed vs. Torque Load 120 Current vs. Torque Load 14.0 A Performance Data (24V DC Motor)

Open the catalog to page 3

Output Signal Motor Brake Internal Limit Switch 0 = Without Output Spindle Rotation Number 00 = Without internal limit switch XX = With internal limit switch, number of output rotations (between25-58 rotations, factory preset)

Open the catalog to page 4

TGM5 Ordering Key Appendix Connector 1 = DIN 6P, 90° Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice.

Open the catalog to page 5