Product Segments • Comfort Motion TiMOTION’s TA5P is designed using a one-piece aluminum outer cover for increased strength and enhanced protection from contaminants. The TA5P utilizes a linear slide to move the load, instead of a standard extension tube. Industry certifications for the TA5P include EMC, and RoHS. It is also available with Hall sensors for position feedback and a special L-shaped mounting bracket. General Features Max. load Retracted length Hall sensors, L-shaped bracket Specially designed for recliner One-piece design, stronger structure, cable-free

Retracted length

Load and Speed CODE Load (N) Self Locking Typical Current at Typical Speed (mm/s) Force (N) Rated Load (A) Push Pull No Load With Load No Load With Load Motor Speed (2600RPM, Duty Cycle 10%) Motor Speed (3400RPM, Duty Cycle 10%) 1 Option C / D / E / F / G / J / L / M / N / O / Q / T use iron bearing, others use plastic. 2 Please refer to the approved drawing for the final authentic value. 3 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. 4 Operational temperature range at full...

Performance Data (24V DC Motor) Motor Speed (2600RPM, Duty Cycle 10%)

Performance Data (24V DC Motor) Motor Speed (3400RPM, Duty Cycle 10%)

Load and Speed See page 3 Stroke (mm) Note: please contact TiMOTION before making an order L-Shaped Bracket on The FrontFunctions for Limit Switches See page 7 Output Signal 1 = Two switches at full retracted / extended positions to cut current 2 = Two switches at full retracted / extended positions to cut current + third one in between to send signal 3 = Two switches at full retracted / extended positions to send signal 4 = Two switches at full retracted / extended positions to send signal + third one in between to send signal The Slot Position on Outer Tube 0 = Without (for direct cut 2 = Straight,...

TA5P Ordering Key AppendixFunctions for Limit Switches Wire Definitions CODE Pin • 1 (Green) 2 (Red) O 3 (White) 4 (Black) 5 (Yellow) A (Blue) 1 extend (VDC+) N/A N/A N/A retract (VDC+) N/A 2 extend (VDC+) N/A middle switch pin B middle switch pin A retract (VDC+) N/A 3 extend (VDC+) common upper limit switch N/A retract (VDC+) lower limit switch 4 extend (VDC+) common upper limit switch medium limit switch retract (VDC+) lower limit switch The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior...