Product Segments • Comfort Motion TiMOTION's TA42 linear actuator can fulfill a manufacturer's seating requirement for small installation dimensions. It comes without any motor housing,which can save on space while being installed in the recliner. TA42's compact design is only 100mm. It has a maximum stroke length of 200mm, yet it can withstand a maximum pressure of 1500N, which can be perfect for the head position adjustment for recliners. General Features Max. load Retracted length Push only Operational temperature range Suitable for recliner applications

Drawing Standard Dimensions (mm) Load and Speed CODE Load (N) Typical Current (A) Typical Speed (mm/s) Push Pull No Load With Load No Load With Load 3225 Motor Speed (5000RPM, Duty Cycle 10%) 1 Please refer to the approved drawing for the final authentic value. 2 The current & speed in table are tested with 24V DC motor. 3 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. 4 The current & speed in table are tested when the actuator is extending under push load. 5 The data in the...

3225 Motor Speed (5000RPM, Duty Cycle 10%) Speed vs. Load 14.0 Performance Data (24V DC Motor)

Rear Attachment (mm) See page 5 N = Plastic, U clevis, one piece, slot 6, depth 13, hole 10 E = Aluminum casting, U clevis, slot 5.2, depth 12.2, hole 6.2 G = Aluminum casting, U clevis, slot 5.2, depth 12.2, hole 8.2 Front Attachment (mm) See page 5 N = Plastic, U clevis, slot 7, depth 20, hole 10 E = Aluminum casting, U clevis, slot 5.2, depth 12.2, hole 6.2 G = Aluminum casting, U clevis, slot 5.2, depth 12.2, hole 8.2 Direction of Rear Attachment (Counterclockwise) See page 6 1 = Black + 428C retaining ring Special Functions for Spindle Sub-Assembly Functions for Limit Switches See page 6...

TA42 Ordering Key Appendix Retracted Length (mm) 1. Calculate A+B = Y 2. Retracted length needs to ≥ Stroke+Y A. Front Attach. G = Aluminum casting, U clevis, slot 5.2, depth 12.2, hole 8.2 ø20 E = Aluminum casting, U clevis, slot 5.2, depth 12.2, hole 6.2 ø20 N = Plastic, U clevis, one piece, slot 6, depth 13, hole 10 Front Attachment (mm) E = Aluminum casting, U clevis, slot 5.2, depth 12.2, hole 6.2 G = Aluminum casting, U clevis, slot 5.2, depth 12.2, hole 8.2 N = Plastic, U clevis, slot 7, depth

TA42 Ordering Key AppendixDirection of Rear Attachment (Counterclockwise) 1 = 0° 3 = 90° Functions for Limit Switches Wire Definitions CODE Pin • 1 (Green) 2 (Red) O 3 (White) 4 (Black) 5 (Yellow) A (Blue) 1 extend (VDC+) N/A N/A N/A retract (VDC+) N/A 3 extend (VDC+) common upper limit switch N/A retract (VDC+) lower limit switch P = Molex 8P, without anti-clip, Q = Molex 6P, 90° plug (40511-123) 1 = DIN 6P, 90° plug 2 = Tinned leads U = Molex 6P 3.0 pitch, 180° plug Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION...