Product Segments • Care Motion TiMOTION’s TA41 is the ideal linear actuator for medical applications, particularly for dentist chairs and electric wheelchairs. Its physical design is similar to the TA7, yet without the IP rating. The TA41 provides multiple options of cable exits and it supports a maximum of 800Kg force in push. General Features Max. load Retracted length Output signals Hall sensor*2, Reed sensor Black, grey Operational temperature range Suitable for dentist chairs and wheelch

Retracted Length Note 1 The above dimension is with motor rubber cover.

Push Pull Self Locking Force (N) No Load With Load No Load With Load Motor Speed (2600RPM, Duty Cycle 10%) Motor Speed (3400RPM, Duty Cycle 10%) Motor Speed (3800RPM, Duty Cycle 10%) 1 Please refer to the approved drawing for the final authentic value. 2 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. 3 The current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the current measured in 24V DC. With a 36V DC motor, the current...

Performance Data (24V DC Motor) Motor Speed (2600RPM, Duty Cycle 10%)

Performance Data (24V DC Motor) Motor Speed (3400RPM, Duty Cycle 10%)

Performance Data (24V DC Motor) Motor Speed (3800RPM, Duty Cycle 10%)

Load and Speed See page 3 Retracted Length (mm) See page 8 2=Aluminum casting, U clevis, slot 6.2, depth 17.0, hole 10.2 3=Aluminum casting, U clevis, slot 6.2, depth 17.0, hole 12.2 4=Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 10.2 5=Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 12.2 C = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 10.2, T-bush F=Aluminum CNC, no slot, hole 10.2, T-bush 0 = Without punched hole on inner tube, without slot, 1 = Punched hole on inner tube + plastic cap, without slot, hole 10.2, with plastic bushing 2 = Punched hole on inner tube...

TA41 Ordering Key Appendix Retracted Length (mm) 2. Retracted length needs to > Stroke+Y

TA41 Ordering Key Appendix Rear Attachment (mm) C = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 10.2, T-bush 5 = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 12.2 4 = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 10.2 3 = Aluminum casting, U clevis, slot 6.2, depth 17.0, hole 12.2 2 = Aluminum casting, U clevis, slot 6.2, depth 17.0, hole 10.2 F = Aluminum CNC, no slot, hole 10.2, T-bush 3 = Plastic, U clevis, slot 8.2, depth 20.2, hole 10.2, for load push < 4000N & pull < 2500N ø26 2 = Punched hole on inner tube + plastic cap, without slot, hole 12.2 ø26 1 = Punched...

TA41 Ordering Key AppendixFront Attachment (mm) 8 = Aluminum casting, U clevis, slot 6.2, depth 17.0, hole 12.2 9 = Aluminum casting, U clevis, slot 6.2, depth 17.0, hole 10.2, with plastic T-bushing J = Aluminum casting, without slot, hole 10.2, for dental chair Direction of Rear Attachment (Counterclockwise) 1 = 0° 3 = 90° Functions for Limit Switches Wire Definitions CODE Pin • 1 (Green) 2 (Red) O 3 (White) 4 (Black) 5 (Yellow) A (Blue) 1 extend (VDC+) N/A N/A N/A retract (VDC+) N/A 2 extend (VDC+) N/A middle switch pin B middle switch pin A retract (VDC+) N/A 3 extend (VDC+) common upper...

C = Y cable (for direct cut system, no water proof, anti pull) Cable Length for Direct Cut System (mm) M = DIN 4P, dental chair plug (40510-143, standard) N = DIN 4P, dental chair plug (40510-040) G = Audio plug P = Molex 8P, 90° plug, without Q = Molex 6P, 90°plug Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice.