Product Segments • Care Motion TA37 is one of our high quality medical actuators. TA37 is recommended for the demanding force medical applications. It remains stable speed even under heavy loading. The maximum stroke of TA37 is up to 1000mm and its IP rating can support up to IP66W. The suitable medical applications for TA37 are treatment tables or patient hoist systems. General Features Retracted length Output signals Options Voltage Color Operational temperature range 12,000N (push) Manual release (for patient hoist) 24 / 36V DC (thermal protector) Black or grey +5°C~+45°C Suitable for patient hoist application

Drawing Standard Dimensions (mm) Load and Speed Self Locking Force (N) No Load With Load No Load With Load 5844 Motor Speed (4100RPM, Duty Cycle 10%) 1 Please refer to the approved drawing for the final authentic value. 2 Max static pull load 4,000N, dynamic pull not allowed. 3 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. 4 The current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the current measured in 24V DC. With...

Motor Speed (4100RPM, duty cycle 10%)

TA37 Ordering KeyTA37Voltage 5 = 24V DC, thermal protector Load and Speed See page 2 Retracted Length (mm) See page 6 Rear Attachment (mm) See page 7 Front Attachment (mm) See page 7-8 Direction of Rear Attachment (Counterclockwise) See page 8 1 = Aluminum casting, U clevis, slot 6.2, depth 19.5, hole 10.2 2 = Aluminum casting, U clevis, slot 6.2, depth 19.5, hole 12.2 3 = Aluminum casting, U clevis, slot 8.2, depth 19.5, hole 10.2 4 = Aluminum casting, U clevis, slot 8.2, depth 19.5, hole 12.2 C = Aluminum casting, U clevis, slot 8.2, depth 19.5, hole 10.2, with plastic T-busing 1 = Punched...

TA37 Patient Hoist Ordering Key TA37 Rear Attachment (mm) See page 7 C = Aluminum casting, U clevis, slot 8.2, depth 19.5, hole 10.2, with plastic T-busing Front Attachment (mm) See page 7-8 F = Aluminum casting, U clevis, slot 8.2, depth 19.0, hole 10.2, with plastic T-bushing, for Manual Release I = Aluminum casting, U clevis, slot 8.2, depth 39.0, hole 10.2, with plastic T-bushing, for manual release G = Aluminum casting, U clevis, slot 8.2, depth 19.0, hole 10.2, with plastic T-bushing, Without press down for manual release Direction of Rear Attachment (Counterclockwise) See page 8 Emergency...

TA37 Ordering Key Appendix Retracted Length (mm) 2. Retracted length needs to > Stroke + Y Front Attach. General For Patient Hoist General Patient

TA37 Ordering Key AppendixRear Attachment (mm) 1 = Aluminum casting, U clevis, slot 6.2, depth 19.5, hole 10.2 2 = Aluminum casting, U clevis, slot 3 = Aluminum casting, U clevis, slot 6.2, depth 19.5, hole 12.2 8.2, depth 19.5, hole 10.2 4 = Aluminum casting, U clevis, slot 8.2, depth 19.5, hole 12.2 C = Aluminum casting, U clevis, slot 8.2, depth 19.5, hole 10.2, with plastic T-busing Front Attachment (mm) 1 = Punched hole on inner tube + plastic cap, without slot, hole 10.2, with plastic bush 2 = Punched hole on inner tube + plastic cap, without slot, hole 12.2 7 = Aluminum casting, U clevis,...

TA37 Ordering Key Appendix Front Attachment (mm) M = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 10.2, with plastic T-bushing L = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 12.2 K = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 10.2 Direction of Rear Attachment (Counterclockwise) 1 = 0°

TA37 Ordering Key Appendix Connector 1 = DIN 6P, 90° plug P = Molex 8P, 90° plug, without anti-clip Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice