Product Segments The TA31 is one of our great medical grade linear actuators. It can lift up to • Care Motion medical applications such as medical beds, medical chairs, or home care options. 8000N and its IP rating is up to IP66W. The TA31 is a high quality solution for General Features Max. load Retracted length Output signals Black, grey Operational temperature range at full performance An economic solution with compact installation dimension Suitable for patient hoist application

Load and Speed CODE Load (N) Push Pull Self Locking Force (N) No Load With Load No Load With Load Motor Speed (3800RPM, duty cycle 10%) Motor Speed (4500RPM, duty cycle 10%) H 5000 3000 1 Please refer to the approved drawing for the final authentic value. 2 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. 3 The current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the current measured in 24V DC; speed will be similar for...

Performance Data (24V DC Motor) Motor Speed (3800RPM, Duty Cycle 10%)

Performance Data (24V DC Motor) Motor Speed (4500RPM, Duty cycle 10%)

Load and Speed See page 3 Retracted Length See page 9 (mm) Rear Attachment 2 = Plastic, U clevis, width 8.2, depth 17.0, hole 10.2 (for push < 4000N) (mm) 3 = Plastic, U clevis, width 8.2, depth 17.0, hole 12.2 (for push < 4000N) See page 10 4 = Aluminum casting, U clevis, width 8.2, depth 17.0, hole 10.2 (for push > 4000N) 5 = Aluminum casting, U clevis, width 8.2, depth 17.0, hole 12.2 (for push > 4000N) Front Attachment 1 = Punched hole on inner Aluminum tube + plastic cap, without slot, hole 10.2, plastic bush (mm) 2 = Punched hole on inner Aluminum tube + plastic cap, without slot, hole...

TA31 Patient Hoist Ordering Key TA31 Rear Attachment (mm) See page 10 C = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 10.2, with T-bushing Front Attachment (mm) See page 11 F = Aluminum casting, U clevis, slot 8.2, depth 19.0, hole 10.2, with T-bushing, manual release I = Aluminum casting, U clevis, slot 8.2, depth 39.0, hole 10.2, with plastic T-bushing, for manual release G = Aluminum casting, U clevis, slot 8.2, depth 19.0, hole 10.2, with plastic T-bushing, Without press down for manual release Direction of Rear Attachment (Counterclockwise) See page 12 Special Functions for Spindle...

P = Aluminum die-cast, no slot, hole diameter 10.2 mm, for T-sense only (Push-only application) Q = Aluminum die-cast, no slot, hole diameter 10.2 mm, T-type bushing, for T-sense only (Push-only application) R = Aluminum die-cast, no slot, hole diameter 12.2 mm, for T-sense only (Push-only application) S = Aluminum die-cast, no slot, hole diameter 10.2 mm, for T-sense only (Push/pull applications) T = Aluminum die-cast, no slot, hole diameter 10.2 mm, T-type bushing, for T-sense only (Push/pull applications) U = Aluminum die-cast, no slot, hole diameter 12.2 mm, for T-sense only (Push/pull applications)...

TA31 Ordering Key AppendixRetracted Length (mm)1. Calculate A+B + C = Y2. Retracted length needs to > Stroke + Y A. Rear Attach. C. Load < 5000 (N) Front Attach. General Patient hoist T-sense Front Attach. Spindle Function * T-sense Rear attachment #P, Q, R only use on Load type #T C. Load = 5000 / 6000 / 8000 (N) * T-sense Rear attachment #S, T, U use on Load type #D, 1, 2 Front Attach. Spindle Function * For stroke over 400mm, please contact our engineers.

TA31 Ordering Key Appendix Rear Attachment (mm) 2 = Plastic, U clevis, width 8.2, depth 17.0, hole 10.2 (for push < 4000N) 3 = Plastic, U clevis, width 8.2, depth 17.0, hole 12.2 (for push < 4000N) 4 = Aluminum casting, U clevis, width 8.2, depth 17.0, hole 10.2 (for push > 4000N) 5 = Aluminum casting, U clevis, width 8.2, depth 17.0, hole 12.2 (for push > 4000N) C = Aluminum casting, U clevis, slot P = Aluminum die-cast, no slot, hole 8.2, depth 17.0, hole 10.2, with diameter 10.2 mm, for T-sense T-bushing only (Push-only application) R = Aluminum die-cast, no slot, hole diameter 12.2 mm, for...

TA31 Ordering Key Appendix Front Attachment (mm) 4 = Plastic, U clevis, width 8.2, depth 20.0, hole 12.2 (for push < 4000N, pull < 2500N) 8 = Aluminum casting, U clevis, width 6.2, depth 17.0, hole 12.2 F = Aluminum casting, U clevis, slot 8.2, depth 19.0, hole 10.2, with T-bushing, manual release I = Aluminum casting, U clevis, slot 8.2, depth 39.0, hole 10.2, with plastic T-bushing, for manual release G = Aluminum casting, U clevis, slot 8.2, depth 19.0, hole 10.2, with plastic T-bushing, Without press down for manual release 9 = Aluminum casting, U clevis, width 6.2, depth 17.0, hole 10.2,...

TA31 Ordering Key AppendixDirection of Rear Attachment (Counterclockwise) 1 = 0° 3 = 90° Functions for Limit Switches Wire Definitions CODE Pin • 1 (Green) 2 (Red) O 3 (White) 4 (Black) 5 (Yellow) A (Blue) 1 extend (VDC+) N/A N/A N/A retract (VDC+) N/A 2 extend (VDC+) N/A middle switch pin B middle switch pin A retract (VDC+) N/A 3 extend (VDC+) common upper limit switch N/A retract (VDC+) lower limit switch 4 extend (VDC+) common upper limit switch medium limit switch retract (VDC+) lower limit switch 5 extend (VDC+) N/A upper limit switch common retract (VDC+) lower limit switch

C = Y cable (direct cut, water proof, anti-pull) Cable Length for Direct Cut System (mm) J = Extension cable, not preset on motor cover (cable legth 120) R = Extension cable, preset on motor cover (cable legth 50) P = Molex 8P, 90° plug, without anti-clip Q = Molex 6P, 90° plug, without anti-clip S = Molex 6P, 180° plug, without anti-clip U = Molex 6P 3.0 ptich, 180° plug Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice.