Product Segments • Industrial Motion TiMOTION's TA2PAC is a linear actuator with an integrated AC/DC power supply. It is controlled by 1 neutral wire and 2 line wires (extension and retraction), making it ideal for automating ventilation systems in livestock farming. The TA2PAC must be paired with the TJB13 junction box. General Features Max. load Retracted length > 235mm (depending on chosen options) Output signals Operational temperature range Operational temperature range

CODE Load (N) Self Typical Current (A) Typical Speed (mm/s) Typical Current (A) Typical Speed (mm/s) Push Pull L°ckingNo Load With Load No Load With Load No Load With Load No Load With Load Force Motor Speed (5200RPM, Duty Cycle 25%) 1 Please refer to the approved drawing for the final authentic value. 2 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. 3 The current & speed in table are tested when the actuator is extending under push load. 4 Standard stroke: Min. 20mm, Max....

Motor Speed (5200RPM) Speed vs. Load 60.0 Performance Data (110V DC Motor)

Motor Speed (5200RPM) Speed vs. Load 60.0 Performance Data (220V DC Motor)

Load and Speed See page 2 Retracted Length See page 6 (mm) Rear Attachment 1 = Aluminum casting, hole 6.4, one piece casting with gear box (mm) 2 = Aluminum casting, hole 8.0, one piece casting with gear box See page 7 3 = Aluminum casting, hole 10.0, one piece casting with gear box 4 = Aluminum casting, U clevis, slot 6.0, depth 10.5, hole 6.4, one piece casting with gear box 5 = Aluminum casting, U clevis, slot 6.0, depth 10.5, hole 8.0, one piece casting with gear box 6 = Aluminum casting, U clevis, slot 6.0, depth 10.5, hole 10.0, one piece casting with gear box Front Attachment 1 = Aluminum...

qo t moTion Retracted Length (mm) 1. Calculate A+B + C = Y 3. For TA2PAC, the retracted length of actuator needs to > the 2. The retracted length of actuator needs to > Stroke+Y min RL value in table, in case the tube set too short. Stroke (mm) Load & Speed Type(N) A, B, C, D, E Rear Attach. Front Attach. Signal Output Min RL Value

TA2PAC Ordering Key AppendixRear Attachment (mm) 1 = Aluminum casting, hole 6.4, one 2 = Aluminum casting, hole 8.0, one piece casting with gear box piece casting with gear box 3 = Aluminum casting, hole 10.0, one piece casting with gear box 4 = Aluminum casting, U clevis, slot 6.0, depth 10.5, hole 6.4, one piece casting with gear box 5 = Aluminum casting, U clevis, slot 6 = Aluminum casting, U clevis, slot 6.0, depth 10.5, hole 8.0, one 6.0, depth 10.5, hole 10.0, one piece casting with gear box piece casting with gear box Front Attachment (mm) 1 = Aluminum casting, hole 6.4 2 = Aluminum casting,...

TA2PAC Ordering Key Appendix Direction of Rear Attachment (Counterclockwise) 1 = 90° Connector 1 = Tinned leads Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice.