Product Segments • Industrial Motion Both the TA2 and the TA2P are compact, robust, and capable of performing well in certain outdoor environments. A more powerful motor makes the TA2P capable of handling load ratings up to 3500N (787 pounds) while retaining its compact size. In addition to the high power motor, the TA2P linear actuator is available with multiple choices for feedback sensors. General Features Max. load Retracted length ≥ Stroke + 108mm (with Hall sensors or without output signals) Output Signals Mechanical pot., Hall sensor * 2 (5-36V input) Operational temperature range Operational temperature range

Dimensions without Output Signal or with Hall Sensors (mm) Dimensions with POT or Reed Sensor (mm)

Load and Speed (12V DC) CODE Load (N) Push Pull Motor Speed (5200RPM, Duty Cycle 25%) Motor Speed (6600RPM, Duty Cycle 25%) F 250 250 Motor Speed (3800RPM, Duty Cycle 25%) S 3500 2000 Motor Speed (2200RPM, Duty Cycle 25%) T 2000 2000 Self Locking Force (N) No Load With Load No Load With Load Load and Speed (24V DC) CODE Load (N) Push Pull Motor Speed (5200RPM, Duty Cycle 25%) Motor Speed (6600RPM, Duty Cycle 25%) F 250 250 Motor Speed (3800RPM, Duty Cycle 25%) S 3500 2000 Motor Speed (2200RPM, Duty Cycle 25%) T 2000 2000 Self Locking Force (N) No Load With Load No Load With Load

Load and Speed (36V DC) CODE Load (N) Push Pull Motor Speed (5200RPM, Duty Cycle 25%) Motor Speed (6600RPM, Duty Cycle 25%) F 250 250 Motor Speed (3800RPM, Duty Cycle 25%) S 3500 2000 Motor Speed (2200RPM, Duty Cycle 25%) T 2000 2000 Self Locking Force (N) No Load With Load No Load With Load

Push Pull Motor Speed (5200RPM, Duty Cycle 25%) Motor Speed (6600RPM, Duty Cycle 25%) F 250 250 Motor Speed (3800RPM, Duty Cycle 25%) S 3500 2000 Self Locking Force (N) No Load With Load No Load With Load Motor Speed (2200RPM, Duty Cycle 25%) 1 Please refer to the approved drawing for the final authentic value. 2 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. 4 The current & speed in table are tested when the actuator is extending under push load. 5 The current & speed in table...

Motor Speed (3800RPM) Speed vs. Load 3.5

Motor Speed (2200RPM) Speed vs. Load 3.5

Motor Speed (2200RPM) Speed vs. Load 3.5

Motor Speed (5200RPM) Speed vs. Load 60.0

Motor Speed (3800RPM) Speed vs. Load 3.5

Motor Speed (2200RPM) Speed vs. Load 3.5

Motor Speed (3800RPM) Speed vs. Load 3.5

Motor Speed (2200RPM) Speed vs. Load 3.5

Rear Attachment 1 = Aluminum, slotless, hole 6.4, one piece casting with gearbox (mm) 2 = Aluminum, slotless, hole 8.0, one piece casting with gearbox See page 24 3 = Aluminum, slotless, hole 10.0, one piece casting with gearbox 4 = Aluminum, U clevis, slot 6.0, depth 10.5, hole 6.4, one piece casting with gearbox 5 = Aluminum, U clevis, slot 6.0, depth 10.5, hole 8.0, one piece casting with gearbox 6 = Aluminum, U clevis, slot 6.0, depth 10.5, hole 10.0, one piece casting with gearbox Front Attachment 1 = Aluminum, slotless, hole 6.4 3 = Aluminum, U clevis, slot 6.0, depth 16.0, hole 10.0 (mm)...

TA2P Ordering Key Appendix Retracted Length (mm) 2. Retracted length needs to > Stroke + Y 3. Min. retracted length related with IP: When choosing IP66M, the min. retracted length should comply with the table below. IP66M Min. Retracted lengthFront Attachment Front Attachment B. Load VS. Stroke Stroke (mm) Load (N) C. Output Signals CODE

TA2P Ordering Key Appendix Voltage 5 = 24V DC, PTC 4 = Aluminum, U clevis, slot 6.0, depth 10.5, hole 6.4, one piece casting with gearbox 5 = Aluminum, U clevis, slot 6.0, depth 10.5, hole 8.0, one piece casting with gearbox 15 6 = Aluminum, U clevis, slot 6.0, depth 10.5, hole 10.0, one piece casting with gearbox 15 3 = Aluminum, slotless, hole 10.0, one piece casting with gearbox 2 = Aluminum, slotless, hole 8.0, one piece casting with gearbox 1 = Aluminum, slotless, hole 6.4, one piece casting with gearbox

TA2P Ordering Key Appendix Front Attachment (mm) 2 = Aluminum, slotless, hole 8.0 5 = Aluminum, U clevis, slot 6.0, depth 16.0, hole 8.0 6 = Aluminum, slotless, hole 10.0 4 = Aluminum, U clevis, slot 6.0, depth 16.0, hole 6.4 3 = Aluminum, U clevis, slot 6.0, depth 16.0, hole 10.0 1 = Aluminum, slotless, hole 6.4 Direction of Rear Attachment (Counterclockwise) 1 = 90°

qo t moTion Wire Definition Port Function of Wire Limit Switches Color Wire Gauge (AWG) Output Signal 0. Without A1 Two micro switches cut off the actuator at end of stroke (EOS) Two micro switches cut off the actuator at EOS + in-between third one sends signal Two micro switches send signal at end of stroke N. Hall sensor * 2 EXT+ POT-Vout POT-Vin (+5V) POT-GND 3rd LS pin2 3rd LS pin1 EXT+ RET+ LS-COM UP LS LS-COM UP LS POT-GND LOW LS POT-Vin (+5V) The signal wires gauge for limit switch function 1 combined with signal output 1 are 20 AWG For other wire gauge requirements, please contact Engineering...

qo t moTion Wire Definition Port Function of Wire Wire Gauge Output Signal Limit Switches Color (AWG) The signal wires gauge for limit switch function 1 combined with signal output 1 are 20 AWG For other wire gauge requirements, please contact Engineering Two micro switches send signal at end of stroke + in-between third one sends signal N. Hall sensor * 2 EXT+ Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice.