Product Segments • Industrial Motion TiMOTION's TA29AC is a linear actuator with an AC/DC power supply integrated into the housing that affords a maximum 4000N force (push/pull). It is controlled by 1 neutral wire and 2 line wires (extension and retraction), making it a powerfully practical means to automate the ventilation system in livestock farming. General Features Max. load Retracted length > 302mm (depending on chosen options) Output Signals Black, grey Operational temperature range

Load(N) Push Pull Self Locking Force (N) Typical Current (A) Typical Speed (mm/s) No No With With No No With With Load Load Load Load Load Load Load Load Motor Speed (5200RPM, Duty Cycle 10%) 1 Please refer to the approved drawing for the final authentic value. 2 The current & speed in table are tested when the actuator is extending under push load. 3 Standard stroke: Min. 25mm, Max. please refer to below table. CODE Load (N) Max Stroke (mm)

Motor Speed (5200RPM) Speed vs. Load 7.0 Performance Data (100V AC Motor)

Motor Speed (5200RPM) Speed vs. Load 10.0 9.0 8.0 7.0 Speed (mm/s) Performance Data (220V AC Motor)

Load and Speed See page 2 Retracted Length See page 6 (mm) Rear Attachment 3 = Aluminum, U clevis, slot 6.2, depth 12.2, hole 10.2 4 = Aluminum, U clevis, slot 6.2, depth 12.2, hole 12.2 Front Attachment 3 = Aluminum, slotless, hole 10.2 4 = Aluminum, slotless, hole 12.2 Rear Attachment (Counterclockwise) Color 1 = Black 2 = Pantone 428C Special Functions 0 = Without (Standard) 2 = Standard push only Functions for 1 = Two switches at full retracted / extended positions to cut current Limit Switches Output Signals 0 = Without 1 = POT Connector 2 = Tinned leads Cable Length (mm) 0 = Straight, 100...

2. Retracted length needs to > Stroke+Y 3. Retracted length needs to > 302mm C. Special Bunctions for Spindle Sub-Assembly 0 -

TA29AC Ordering Key Appendix Rear Attachment (mm) 3 = Aluminum, U clevis, slot 6.2, depth 12.2, hole 10.2 4 = Aluminum, U clevis, slot 6.2, depth 12.2, hole 12.2 Front Attachment (mm) 3 = Aluminum, slotless, hole 10.2 4 = Aluminum, slotless, hole 12.2 ø12.2 Direction of Rear Attachment (Counterclockwise) 1 = 90°

qo t moTion Wire Definition Without T-Smart Port Functions for Wire Color Wire Gauge Position Feedback Number Limit Switches (AWG) • Black •w hite• Green 18 Live (EXT+) Live (RET+) Neutral Live (EXT+) Live (RET+) Neutral V-out (signal) Connector 2 = Tinned leads Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice.