Product Segments • Comfort Motion TiMOTION's TA25 series electric linear actuator uses a linear slide to move a load, instead of an extension tube. This linear slide mechanism allows for a significantly shorter retracted length and makes the TA25 a great solution for various furniture applications. The TA25 is designed to function as a direct cut system, eliminating the need for a control box, offering a simple and economical solution. Available options are Hall sensors and a special L-shaped mounting bracket. General Features Max. speed at max. load Max. speed at no load Retracted length Certificate Output signals Voltage Operational temperature range

Drawing Standard Dimensions (mm) Load and Speed CODE Load (N) Push Pull Self Locking Force (N) No Load With Load No Load With Load Motor Speed (3800RPM, Duty Cycle 10%) Note 1 Please refer to the approved drawing for the final authentic value. 2 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. 3 Operational temperature range at full performance: +5°C~+45°C. 4 The current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the...

Motor Speed (3800RPM, duty cycle 10%) Speed vs. Load Performance Data (24V DC Motor)

Load and Speed See page 2 Retracted Length (mm) Bracket on The Front & Rear End See page 5 122 = Bracket on the front & rear end #0 099 = Bracket on the front & rear end #2 122 = Bracket on the front & rear end #1 0 = Without 1 = Style A: Iron bracket 2 = Style B: Plastic bracket Functions for Limit Switches See page 6 Output Signals 1 = Two switches at full retracted / extended positions to cut current 2 = Two switches at full retracted / extended positions to cut current + third one in between to send signal 3 = Two switches at full retracted / extended positions to send signal 4 = Two switches...

TA25 Ordering Key Appendix Retracted Length (mm) 1. Minimum retracted length is according to bracket on the front & rear end. Bracket On The Front & Rear End Minimum Retracted Length Bracket on The Front & Rear End 0 = Without 1 = Style A: Iron bracket X Retracted length Retracted length 2 = Style B: Plastic bracket Retracted length Rear Attachment (mm) Bracket on the front & rear end #0 & 1 16

TA25 Ordering Key AppendixFunctions for Limit Switches Wire Definitions CODE Pin • 1 (Green) 2 (Red) O 3 (White) 4 (Black) 5 (Yellow) A (Blue) 1 extend (VDC+) N/A N/A N/A retract (VDC+) N/A 2 extend (VDC+) N/A middle switch pin B middle switch pin A retract (VDC+) N/A 3 extend (VDC+) common upper limit switch N/A retract (VDC+) lower limit switch 4 extend (VDC+) common upper limit switch medium limit switch retract (VDC+) lower limit switch 1 = DIN 6P, 90° plug 2 = Tinned leads P = Molex 8P, 90° plug, without anti-clip U = Molex 6P 3.0 pitch, 180° plug L = 1+1, 2 motors direct cut system S =...